#1
|
|||
|
|||
which mic should I get?
I have a Sure SM57 for use with the electrics, Strat & LP through the Marshal. It connects to a Lexicon Alpha 'preamp' which then goes to Cubase. I get a rich thick recorded tone this way. But when recording an acoustic, the result is blunt and compressed. I think it's due to the mic being intended for electric guitar tone & volume range. Is there a mic in the $100 price range that would work will for acoustic guitar in this set-up? thnx/jd
ps. OOps, this was meant to be in the Record section rather than Play&Write. Oh well... Last edited by joeld; 07-06-2019 at 12:16 PM. |
#2
|
|||
|
|||
http://www.3uaudio.com/cp.asp?id=651
These are very good for both acoustic guitar and vocals. Not cheap surface mount technology. High quality C12 style capsule, high quality components including Toshiba FET, Wima film capacitors and Panasonic electrolytic capacitors. Very smooth, not hyped. Last edited by Acousticado; 07-08-2019 at 08:38 AM. Reason: References to other forums not permitted |
#3
|
|||
|
|||
Unfortunately, the problem you have is that the Lexicon Alpha does not have 48v phantom power, which is needed for pretty much all condenser mics (a few have a battery option).
Rather than putting another piece of gear in line (a phantom power supply), I would recommend moving to an audio interface with built-in phantom power. There are many LDC (large diaphragm condenser) mics in the $100-$150 range, and you may find a deal on a used one when shopping around.
__________________
Mike My music: https://mikebirchmusic.bandcamp.com 2020 Taylor 324ceBE 2017 Taylor 114ce-N 2012 Taylor 310ce 2011 Fender CD140SCE Ibanez 12 string a/e 73(?) Epiphone 6830E 6 string 72 Fender Telecaster Epiphone Dot Studio Epiphone LP Jr Chinese Strat clone Kala baritone ukulele Seagull 'Merlin' Washburn Mandolin Luna 'tatoo' a/e ukulele antique banjolin Squire J bass |
#4
|
|||
|
|||
Quote:
https://www.youtube.com/watch?v=C5LZ4s4mPKM The C-3 is a cheap-ish condenser mic, with a few pickup configurations. The probable reason it's sounding a little boomy here is it was set up directly opposite the soundhole, around 9" away. I can't remember the switching configuration, btw, I just fiddled with the three switches it has until I got what I considered the best sound for its position. It's going through a separate phantom power amp (very cheap), and then alongside the Anthem-SL in a two-channel Behringer interface (that also has phantom power, but only on both channels or none, and the Anthem doesn't need it) - to enable the stereo example. The Anthem-SL is a great pickup, but I slightly prefer the sound of the C-3 for recording. (The Anthem-SL has its mic component turned fully up, btw. It's not as flexible in balancing the two sources as the full price Anthem.)
__________________
"There is a crack in everything. That's how the light gets in." - Leonard Cohen. |