The Acoustic Guitar Forum

Go Back   The Acoustic Guitar Forum > General Acoustic Guitar and Amplification Discussion > Custom Shop

Reply
 
Thread Tools
  #1  
Old 05-11-2019, 09:49 AM
BobbyMocha BobbyMocha is offline
Registered User
 
Join Date: Aug 2017
Location: Upper Midwest, USA (no accent tho)
Posts: 117
Default Custom Archtop cutaway in progress

A close friend of mine has been making custom guitars and mandolins for about ten years. He's working on an archtop for me that he and I designed. This is his 11th guitar and I thought I would share the progress of this build with you all. Initial pictures are below as well as a description of the wood being used.

The Soundboard:
Port Orford Cedar (Lawson Cypress). This tonewood was salvaged from old fire damaged trees - salvaged from the mountains of SW Oregon. In 2002 an enormous fire named the Biscuit Fire, raged through the Siskiyou National Forest in Oregon. It took nearly 6 months to extinguish and consumed over 500,000 acres. In its wake were many dead but harvestable Port Orford Cedar trees. These trees were very old with ring counts in the 800 to 1000 year range, well exceeding the normal 500-year limit of this species.

The Back:
Claro Walnut grown in Oregon, with deep rich brown and purple tones. Some of the boards have marble cake pigment figure with blacks, greys, greens, golds and reds.

The Sides:
Black Walnut (juglans nigra) / Juglans Hindsii

The Pick Gaurd and Headstock veneer:
1 Big Leaf Maple (acer macrophyllum) piece.

The Neck and Fretboard:
Black Walnut (juglans nigra)

The finish will be a double hit of a Eco-friendly, water-based, clear varnish (I'll get the name).

(I will be choosing hardware and electronics







I will post more as this progresses.

Last edited by BobbyMocha; 05-11-2019 at 10:14 AM.
Reply With Quote
  #2  
Old 05-12-2019, 06:02 AM
GeoffStGermaine GeoffStGermaine is offline
Charter Member
 
Join Date: Jun 2014
Location: Victoria, BC
Posts: 173
Default

Nice choice of woods! I've used Port Orford Cedar over Claro on an Archtop I built a few years back and it is a really nice guitar.

I look forward to seeing this guitar progress!
Reply With Quote
Reply

  The Acoustic Guitar Forum > General Acoustic Guitar and Amplification Discussion > Custom Shop

Thread Tools



All times are GMT -6. The time now is 02:57 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Copyright ©2000 - 2018, The Acoustic Guitar Forum
vB Ad Management by =RedTyger=