#1
|
|||
|
|||
Got a New Cedar top just by switching to 80/20
I wasn't very much pleased with my ebay acquisition of Alvarez AG75CE.
I wanted Cedar Rosewood to try out for sound. For last 6-8 months I repented and was planning to sell it. It just didn't sound like what I had hoped for. Always put Daddario EJ16 on them. Read somewhere on this forum about using 80/20 with Cedar top. Gave it a go wit John Pearse 200L and what the heck. Couldn't keep the guitar down. What a pleasant surprise. Never give up on a guitar until you have tried different strings and different pics. I know now why someone said that somewhere on the net.
__________________
Gibson Hummingbird, J45 Martin OM-21 Breedlove AJ250 - Spruce/Maple Guild D120 - All hog |
#2
|
|||
|
|||
Absolutely...
I was an 80-20 hater but on my J45 they do the job in spades. I use Gibson Masterbuilts, Curt Mangan or Newtone Heritage, none of which are inexpensive. I don't care. No good on the D18 though, gotta' be PB's or Retros.
__________________
Nothing bothers me unless I let it. Martin D18 Gibson J45 Gibson J15 Fender Copperburst Telecaster Squier CV 50 Stratocaster Squier CV 50 Telecaster |
#3
|
|||
|
|||
Quote:
One thing I see a lot on AGF is the tendency to expect perfection right now, with a new guitar. There are so many variables. Patience. |
#4
|
|||
|
|||
Ive got a redwood top over rosewood which I'd been less than enthralled with. I just changed the saddle from Micarta to bone and the change was dramatically good. Now you've given me a second mod to try given the similarities between cedar and redwood. I've been playing Phos Bron for years on pretty much everything, but next change I'll finally open that pack of 80/20 I have sitting around. Thx
|
#5
|
|||
|
|||
I accidentally put on a set of 80/20 Martin Life Span strings on my Taylor 512 cedar/mahogany. I really like the sound, not a huge different from the PB Martins but a bit brighter when strummed, which helps
|
#6
|
|||
|
|||
Agreed. My D18 sounds nice with PBs too.
__________________
Gibson Hummingbird, J45 Martin OM-21 Breedlove AJ250 - Spruce/Maple Guild D120 - All hog |
#7
|
|||
|
|||
I totally agree about your comment regarding trying different strings on your guitar before giving up on it. However, all I ever use are 80/20 bronze strings on just about every acoustic guitar I have ever owned. I usually buy the cheapest Martin strings but I have tried other brands and they all usually work for me. Sadly it's hard to find D'Addario 80/20 bronze strings around here. All the shops carry the PB's but never 80/20's.
|
#8
|
|||
|
|||
Quote:
The special combination of fat + clear tone = pure vintage goodness In my experience |
#9
|
|||
|
|||
I liked the EJ16s on my Ag75. I won it on eBay for a hundred dollars a couple years ago and it was advertised as having a crack in the lower bout. I wanted to fix a crack so I bid and won. The crack turned out to be finish checking and no crack through the wood. This guitar was one of the warmest, most resonant cedar tops I've ever played. Well, seeing as I only payed a hundred, I listed it for sale and made a hundred on it. I owned the MG75 at the time, also, and thought it would get good like the AG. I regret selling the AG, one of the nicest sounding guitars I've played. It was old, well played, had a hard life, bumps and bruises, yet was still ready to make beautiful music. I ended up selling the MG because I knew it would never be as good as the AG I had. I would bet that a tonerite would enhance this guitar, majorly.
__________________
Emerald X-20 Artisan (blue) (keeper) Emerald X-30 black Breedlove Cascade C25/cre Fender PM1 Deluxe Yamaha ll16R A.R.E. Martin Dread Jr E Sitka Eastman Cello |
#10
|
||||
|
||||
The strings make ‘em ring. Good job.
|
#11
|
|||
|
|||
I just think it's due to the popularity of PB strings over 80/20 bronze ones. I don't mind PB's either but my first choice is usually 80/20's if I can find them.
|
#12
|
|||
|
|||
Yes.... My Taylor GS7 with cedar top loves 80/20's tremendously... as well as EB Aluminum Bronze, and a few others. My taste in PB these days is for my 12 string guitars consistently, and the Taylor GO 518 (spruce / mahogany) occasionally. But even it, along with the GS7 sounds great with GHS Contact Core Bright Bronze strings. They are so unique that you owe yourself a spin with a set of them... clear and loud piano like clarity even on the bass strings.
Since taking notes on each brand and type of string I have put on my guitars, it has helped me to reach out and enjoy the new alloy strings that are on the market. I found it odd that the manager/owner of one local Taylor / Breedlove guitar store, will not even stock any of the new alloy guitar strings... pretty much locked into PB or 80/20's only.
__________________
Joe 6 string... Taylor GS7 Custom / GO 818e 1st Edition 12 string... Taylor GO 358e / Guild F512 (79) Baritone…. Guild 258e (8 string) |