|
|
#1
04-02-2018, 11:36 AM
|
||||
|
||||
Switching necks?
Assuming both guitars are from the same maker, the scale length is the same, both are bolt on necks and the only difference is one neck has a 1 3/4 nut and the other has a 1 11/16 nut, can you swap necks
Should I take the saddle size and spacing into account. If yes is sounds like filling in the space and creating a new salddle would do th trick. I would think there might be some tan lines were the neck meets the body of the wider nut/neck. .?????
__________________
David Webber Round-Body Furch D32-LM MJ Franks Lagacy OM Rainsong H-WS1000N2T Stonebridge OM33-SR DB Stonebridge D22-SRA Tacoma Papoose Voyage Air VAD-2 1980 Fender Strat A few Partscaster Strats MIC 60s Classic Vib Strat 
|
|
#2
04-02-2018, 12:46 PM
|
|||
|
|||
|
All I can speak to is Taylor, and the 2 sizes are NOT interchangeable with that brand. Something about the base/heel mounting areas being different sizes. Too bad, because I'd love to try a narrower neck on a Taylor or 2. Will watch for any progress you make on this.
|
|
#3
04-03-2018, 04:11 AM
|
||||
|
||||
|
Quote:
__________________
David Webber Round-Body Furch D32-LM MJ Franks Lagacy OM Rainsong H-WS1000N2T Stonebridge OM33-SR DB Stonebridge D22-SRA Tacoma Papoose Voyage Air VAD-2 1980 Fender Strat A few Partscaster Strats MIC 60s Classic Vib Strat
|
