The Acoustic Guitar Forum

Go Back   The Acoustic Guitar Forum > General Acoustic Guitar and Amplification Discussion > Build and Repair

Reply
 
Thread Tools
  #1  
Old 01-06-2019, 11:09 PM
neocmetal neocmetal is offline
Registered User
 
Join Date: Dec 2018
Posts: 8
Default Is this water damage?

Hi, I have tacoma satin ekk9 that I am trying to polish. I ran into an issue where a small blotch on the wood looks like it has been exposed while wet sanding with soap. Is this water damage? Can anyone with experience know how to fix this? Pictures included.
Attached Images
File Type: jpg 20190106_214213.jpg (27.3 KB, 143 views)
File Type: jpg 20190106_214304.jpg (27.6 KB, 143 views)
Reply With Quote
  #2  
Old 01-07-2019, 08:09 AM
B. Howard B. Howard is offline
Registered User
 
Join Date: Aug 2013
Location: Magnolia DE
Posts: 667
Default

That looks like the sealer under the topcoat coming thorough. You have sanded or buffed through the topcoat.

Only fix is refinish at least the sides.....
Reply With Quote
  #3  
Old 01-07-2019, 09:06 AM
charles Tauber charles Tauber is offline
Registered User
 
Join Date: Feb 2011
Posts: 6,111
Default

Quote:
Originally Posted by B. Howard View Post
That looks like the sealer under the topcoat coming thorough. You have sanded or buffed through the topcoat.
It might be bare wood, your having sanded through the thickness of the finish.

A good example of why not to indiscriminantly "polish" satin finishes. Depending upon the type and thickness of finish, you might get away with it: other times not.

Last edited by charles Tauber; 01-07-2019 at 09:38 AM.
Reply With Quote
  #4  
Old 01-07-2019, 09:35 AM
runamuck runamuck is offline
Registered User
 
Join Date: Jul 2006
Posts: 1,462
Default

Because of the glare, it's hard to tell exactly what's going on here but the white cloudy area following the grain in the upper section of the photo looks like trapped moisture to me.

If it's lacquer, lightly rubbing the area with lac. thinner will likely eliminate it but then you'll need to refinish.
Reply With Quote
  #5  
Old 01-07-2019, 04:26 PM
neocmetal neocmetal is offline
Registered User
 
Join Date: Dec 2018
Posts: 8
Default

Thanks for your suggestions. Here are more pictures. Note, the part looks very pale compared to the rest of the finish near the strap button.
https://imgur.com/a/KmQNwXt
Reply With Quote
  #6  
Old 01-07-2019, 05:56 PM
charles Tauber charles Tauber is offline
Registered User
 
Join Date: Feb 2011
Posts: 6,111
Default

That's appears to be a combination of bare wood and undercoat/sealer. The lighter parts are bare wood.
Reply With Quote
  #7  
Old 01-07-2019, 06:13 PM
JonWint JonWint is offline
Registered User
 
Join Date: Mar 2016
Location: 1 hr from Nazareth
Posts: 394
Default

Was it still wet in the photos? The bare areas look gray compared to the rest. If dry, areas might have changed color due to oxidation of the wood or soap contamination.
Reply With Quote
  #8  
Old 01-07-2019, 07:08 PM
neocmetal neocmetal is offline
Registered User
 
Join Date: Dec 2018
Posts: 8
Default

Quote:
Originally Posted by JonWint View Post
Was it still wet in the photos? The bare areas look gray compared to the rest. If dry, areas might have changed color due to oxidation of the wood or soap contamination.
I think I might have sanded too much of the coat. After wet sanding it, I simply wiped it down with a dry cloth. Funny thing is if I put polish on top of the spot, the coloring looks better on these pictures. The guitar is dry in those photos. It goes back to the original texture if I wipe down the polish. What type of product should I use if I wanted to match the rest of the gloss?


Description for tacoma, What finish compounds do you use on Tacoma guitars?
Tacoma gloss models, use lacquer based UV polyester applied to the thickness of about
three layers of standard paper. It is then sanded flat and buffed to a gloss. On Tacoma
satin models, they use an acid catalyzed 15% sheen conversion varnish.
Attached Images
File Type: jpg 20190107_180259.jpg (27.5 KB, 57 views)
File Type: jpg 20190107_180322.jpg (29.5 KB, 57 views)
File Type: jpg 20190107_180416.jpg (36.1 KB, 56 views)

Last edited by neocmetal; 01-07-2019 at 07:41 PM.
Reply With Quote
Reply

  The Acoustic Guitar Forum > General Acoustic Guitar and Amplification Discussion > Build and Repair

Thread Tools



All times are GMT -6. The time now is 03:34 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Copyright ©2000 - 2018, The Acoustic Guitar Forum
vB Ad Management by =RedTyger=