AKG perception 170 mount replacement

[Guitarist-1977]

So I lost the mount for one of my perception 170 mics (the one the threads to the stand NOT the one that clips around the mic).

I tried ordering a standard one from Amazon but does not attach to the clip.

Any thoughts pls?
Thanks s lot for your time

[phcorrigan]

How about a shock mount? do an Amazon search for "shock mount for small diameter condenser microphone" and you should be able to find one that will work.

[jim1960]

Not sure what you mean by "doesn't attach to the clip, but I own a couple of these. For $20, they'll do the job.

[Guitarist-1977]

Originally Posted by phcorrigan

How about a shock mount? do an Amazon search for "shock mount for small diameter condenser microphone" and you should be able to find one that will work.

Thank you. I got a clip on with the microphone stand that kind of fits the AKG P170. I will just use that for the time being instead of the AKG one.

[Guitarist-1977]

Originally Posted by jim1960

Not sure what you mean by "doesn't attach to the clip, but I own a couple of these. For $20, they'll do the job.

I was trying to keep the piece that clips to the AKG p170 and replace the threaded piece that attaches to a stand or mic bar. This threaded piece did not fit so I used the entire clip that came with the mic stand.

[TBman]

Originally Posted by Guitarist-1977

I was trying to keep the piece that clips to the AKG p170 and replace the threaded piece that attaches to a stand or mic bar. This threaded piece did not fit so I used the entire clip that came with the mic stand.

You need the 5/8" adapter for it probably.

https://www.amazon.com/Pieces-Adapte...s&sr=1-12&th=1