#31
|
|||
|
|||
This is all I need.
|
#32
|
|||
|
|||
These days I gig with an Elite Acoustic StompMix X6 - nothing else on my pedal board. With its storable mixer scenes that can be activated via stomp buttons it does all I need including external microphone, solo boost with different EQ setting or reverb/comp. Beside guitars I play slide, banjo, mandolin, bouzouki ... opened a new thread at AGF displaying my approach last week.
__________________
Blazer & Henkes, vintage Martins & Gibsons, Altman, Martin 00016 Streetmaster mandolin family, Weissenborn, dobro, lap steel, pedal steel, 5-string banjo live gear: Dazzo, Schatten, K&K, Mimesis Kudos, Schoeps CMC6MK4, DPA4061, Neumann KM85, Grace Felix 2, SunnAudio, ToneDexter, RedEye https://www.youtube.com/@roberthasleder1526 |
#33
|
|||
|
|||
Quote:
I keep hearing about this, does this replace a two channel preamp for different acoustic guitar pickup sources? |
#34
|
|||
|
|||
Quote:
Limitation starts when you want to send phantom power to an internal mic of your dual source - rig. That's a thing the StompMix won't do. You will need a dedicated blender/preamp like Grace Felix, K&K Trinity, DTAR Solstice ... for that application. Think of the StompMix X6 as a fully featured digital mixer with ten storable scenes married to a floor pedal. The stomp buttons are for switching between scenes and for muting the whole unit.
__________________
Blazer & Henkes, vintage Martins & Gibsons, Altman, Martin 00016 Streetmaster mandolin family, Weissenborn, dobro, lap steel, pedal steel, 5-string banjo live gear: Dazzo, Schatten, K&K, Mimesis Kudos, Schoeps CMC6MK4, DPA4061, Neumann KM85, Grace Felix 2, SunnAudio, ToneDexter, RedEye https://www.youtube.com/@roberthasleder1526 |
#35
|
|||
|
|||
|
#36
|
|||
|
|||
I use chorus plus either delay or reverb. Chorus is either a Danelectro Cool Cat (vintage light blue one) or a Digitek from the 80s. Boss RV6 for reverb, Behringer VD400 for delay. The latter has beat out several other, more expensive, delay pedals. Looper pedal gets lots of use too.
__________________
Neil M, Ottawa, Ontario, Canada |
#37
|
|||
|
|||
Gigging Board (Acoustic and Vocal)
Going to be running this for about six months to make sure I’m happy with it before I send everything out for a custom build and wiring setup.
Acoustic: Grace FELiX2 with Empress Mkii Compressor>Strymon Deco v2>Strymon Cloudburst in the FX loop. TurboTuner Mini on the Tuner Out. Running SBT on the Tip and Audix mini condenser on the ring. Vocal: Grace ROXi with Universal Audio Max>Strymon Cloudburst in the FX loop. Mic is either an Audix OM7 or Heil PR35, depending on stage/room setup. All DC pedals are powered by a TRUTONE 1SPOT Pro CS6. Probably swap out for a CIOKS so I have a spare output and more robust RCA connectors under the board. Waiting on a couple custom looms for the XLR out and AC. 10 footer for when I’m near a drop snake, 25 footer for when I need to run a home run to the main snake/split. Been running the acoustic side for awhile. Going to make a new temp board at work to accommodate the vocal chain. I’ll post pics once I get everything mounted on the temp board. |
#38
|
|||
|
|||
I have a red eye dual preamp, in the preamp loop there is a : boss waza tuner, into waza CE2 chorus , fender smolder, boss 7 band eq, boss digital delay, boss digital reverb, RC30 looper then back to red eye loop return. Powered by voodo labs power supply
__________________
1985 Ovation custom balladeer 1984 Kramer Focus 1000 1985 Fender American standard strat 1993 Gibson Les Paul Standard 2002 Taylor 310CE 2008 Martin OMC16REP 2013 Taylor 816CE 2016 Kindred OM Little Martin travel guitar Taylor GS mini Red eye preamp Fender Hot Rod deluxe Fishman soloamp Bose L1M2 B2 sub Vintage boss pedals Www.strummingtunes.com Last edited by RCGuitar; 11-08-2023 at 04:09 PM. |
#39
|
|||
|
|||
Well, when I plug in I use this current version. At home, I feed this into an Audient EVO8 controlled via my laptop (w/Reaper). The EVO output goes to 2 Yamaha HS5 speakers on my desk. If this rig needs to go out, I bring a A&H ZEDi10FX mixer and a pair of QSC CP8 pwr speakers.
Left to right I have a:
|
#40
|
|||
|
|||
Been using this for yeeears! I had changed only the type of OD last year, but everything else has been there for many years. All imminently useful for my purposes!
Edward |
#41
|
|||
|
|||
Four Danelectro Fish & Chips EQs > Loop-Master ABCD switch box > Polytune 3 tuner > Fire-Eye Red-Eye preamp.
No effects. I like my acoustic instruments to sound like themselves. Only have effects on my electric rig. Now you know! |
#42
|
|||
|
|||
That’s a sweet setup! I’ve got an MS-2 I’m going to build an mid-side rig with.
Have you found that your wishing you had full phase control over the pickup, or is it pretty well time-aligned with the mic? Quote:
|
#43
|
|||
|
|||
I love how clean that setup is. That’s going to be the challenge for me. I’m building a Schmidt Array style board and need to route the AC away from the audio. Fortunately, most of my audio runs are from pedal to pedal, so just the FX send and returns need a path underneath.
How are you using the two reverbs? |
#44
|
|||
|
|||
No, haven't had to resort to any phase control as they are both pretty much bang on. Good luck with your new rig and post when you're done.
|
#45
|
||||
|
||||
Fishman ToneDEQ and Boss RC-1 looper.
Subject to change at operator's whim, but that works 99% of the time. Edit: lately, with the recording setup, due to laziness, I have run through a TC Play VG (the stand mounted vocal/guitar processor). I have to admit, it does quite a good job for what I'm looking for. The BodyRez really surprised me.
__________________
Dave F ************* Martins Guilds Gibsons A few others 2020 macbook pro i5 8GB Scarlett 18i20 Reaper 7 |