#1
|
|||
|
|||
Volume pedals for passive & active?
Can you recommend a decent volume pedal that can handle active and passive pick ups? I know Ernie Ball offers one but what else is out there theses days?
Thanks |
#2
|
|||
|
|||
Any active volume pedal will handle either. A passive pedal of 250K to 1M ohms will handle both, but you will loose the low impedance flexibility of the active pickup's output (the higher resistance passive volume pedal will not be a good match to a mixer line input, only high impedance guitar inputs). Passive pedals of lower resistance, 25K ohms, will not sound good with passive pickups (the nature of the problem will depend on the type of pickup) but will drive typical mixer line inputs with an active pickup.
__________________
jf45ir Free DIY Acoustic Guitar IR Generator .wav file, 30 seconds, pickup left, mic right, open position strumming best...send to direct email below I'll send you 100/0, 75/25, 50/50 & 0/100 IR/Bypass IRs IR Demo, read the description too: https://youtu.be/SELEE4yugjE My duo's website and my email... [email protected] Jon Fields Last edited by jonfields45; 09-20-2018 at 06:57 PM. |