#16
|
|||
|
|||
And again... A simple test is all it takes
|
#17
|
|||
|
|||
ok I'll just have to wait until I can buy something. Thanks Bruce
__________________
disclaimer I don't know anything, everything I say is a guess, estimate, hearsay, or opinion. For your safety, don't assume anything I say is a fact. Research |
#18
|
|||
|
|||
I use Zinsser clear shellac (Seal Coat isn't available around where I live) and let it sit for a week before decanting the top half into a glass bottle (so you can see it) and leave the wax settled at the bottom of the can. I cut that 50-50 with denatured alcohol and call the result a 1# cut of dewaxed shellac, and it's probably fairly close to that in fact. I put two coats of that, wiped on hard, around the binding channel and on the binding if it's wood, and use ultra-thin CA glue. Have not had issues with strength, adhesion or staining.
__________________
Brian Evans Around 15 archtops, electrics, resonators, a lap steel, a uke, a mandolin, some I made, some I bought, some kinda showed up and wouldn't leave. Tatamagouche Nova Scotia. |