Eastman PCH1-D-CLA Pacific Coast Highway Series Dreadnought Sunburst

[Miami-Guitars]

Miami-Guitars is an authorized Eastman Dealer/ Factory warranty included. If you have any questions or concerns regarding the instrument of your interest, please send us a message via email
[email protected]

Specs:
Neck Material: Maple
Fingerboard: Rosewood
Fingerboard Radius: 12"
Neck Profile: Traditional Even "C"
Nut: Bone 1 3/4"
Fretwire: 22 Jescar-FW43080
Scale Length: 25.4"
Body Dimensions: 15 5/8" x 4 3/4"
Bracings: X-Braced
Body Top: Solid Sitka Spruce
Body Back/Sides: Laminated Sapele
Bridge/Saddle: Rosewood/Bone, 2 5/32" Spacing
Rosette: Abalone
Truss Rod: Dual Acting
Binding: Top and Back
Binding Material: Black Plastic
Logo: Maple Headstock
Inlay: Pearl Dots
Side Dot Color: White
Bridge Pins: White Plastic w/black dots
Body Top Finish: Open Pore
Neck/Headstock Finish: Open Pore
Hardware Color: Nickel
Pickguard: Optional Black Teardrop
Tuners: Ping RM 1171
Electronics: None
Strings: D'Addario .012-.053 #EXP16
Action Height: 12th fret 3/32" on the bass side and 2/32" on the treble side
Case: None
Truss Rod Wrench: 4mm

Is this the Eastman PCH1-D-CLA you've been looking for?

Call Kenny at : 786-275-6700 (Mon-Sat) for more info

Thanks for viewing!​

[campacj]

I know this is an old thread but I'm concerned that this guitar, like the Eastman line in general, is NOT getting it's due!
I have played guitar for 40+ years and I've owned many fine instruments, Martin, Taylor, Collings, Larrivee, and others. This is the best value that I have ever seen or owned. IMHO this guitar even beats the Yamaha FG800 in the "bang-for-your-buck" category and that is saying A LOT! This instrument compares very well to mid-level Martin and Taylor guitars that cost five times more. I strongly suggest using Ernie Ball Aluminum Bronze Medium Light (12-54) strings as they seem to bring out the best in this guitar.

God bless all in this tough time...