The Acoustic Guitar Forum

Go Back   The Acoustic Guitar Forum > General Acoustic Guitar and Amplification Discussion > Custom Shop

Reply
 
Thread Tools
  #121  
Old 02-25-2021, 10:48 AM
canuck7's Avatar
canuck7 canuck7 is offline
Charter Member
 
Join Date: Apr 2008
Location: Oak Harbor WA, and Corpus Christi TX
Posts: 73
Default

Wow, that set looks mouth watering...sometimes these pictures just want to make you take a tour of luthiers shops and look at woods!!
__________________
Jeff

S.Kinnaird 00 B&W Ebony/Engelmann Spruce
Charis SJ African Blackwood/Carpathian Spruce
Simon Fay African Blackwood/Sinker Redwood
Goodall Flamed Maple/Cedar
Morgan 12 String EIR/Spruce
Bozo B100 EIR/Spruce
Reply With Quote
  #122  
Old 02-25-2021, 01:04 PM
Mark Hatcher's Avatar
Mark Hatcher Mark Hatcher is online now
AGF Sponsor
 
Join Date: Jul 2011
Location: Peterborough, New Hampshire
Posts: 3,776
Default

Quote:
Originally Posted by Archaic Guitars View Post
Holy cow! thatís going to make a beautiful guitar.
Yeah, that one was too nice to pass up!

Quote:
Originally Posted by Nemoman View Post
Shazam!!! That's an incredible set of BRW, Mark!

Can't wait to see you make it into something!
Thanks Nemoman. No plans yet. Iím eager to see how that turns out too!

Quote:
Originally Posted by canuck7 View Post
Wow, that set looks mouth watering...sometimes these pictures just want to make you take a tour of luthiers shops and look at woods!!
Iíd like to join you on that tour!
__________________
Mark Hatcher
www.hatcherguitars.com

Give me six hours to chop down a tree and I will spend the first four sharpening the axe
Reply With Quote
  #123  
Old 02-25-2021, 03:41 PM
BEJ BEJ is offline
Charter Member
 
Join Date: Jan 2012
Location: Seattle, WA
Posts: 98
Default

Quote:
Originally Posted by Mark Hatcher View Post
Here is a curly figured Brazilian Rosewood set I just got in:



I has beautiful color and figure and its ring is all that only Brazilian Rosewood can do.

You may have noticed I have been on a bit of a new woods shopping spree. This should be it for awhile. I can stop, I know I can stop! We'll be returning to your regular program shortly!

Thanks for viewing,
Mark
LOL, some people don't believe wood can be addicting, how little do they know.
But, sometimes I wonder if some wood sellers are pulling some sneaky stuff. I can't prove it, when I go through my local hardwood lumber yard I sometimes hear a faint sound like "Buy me, buy me," when I stop and look at a really nice board. Might be some subliminal thing, that's my story anyway.
Reply With Quote
  #124  
Old 02-26-2021, 01:48 PM
Mark Hatcher's Avatar
Mark Hatcher Mark Hatcher is online now
AGF Sponsor
 
Join Date: Jul 2011
Location: Peterborough, New Hampshire
Posts: 3,776
Default

Quote:
Originally Posted by BEJ View Post
LOL, some people don't believe wood can be addicting, how little do they know.
But, sometimes I wonder if some wood sellers are pulling some sneaky stuff. I can't prove it, when I go through my local hardwood lumber yard I sometimes hear a faint sound like "Buy me, buy me," when I stop and look at a really nice board. Might be some subliminal thing, that's my story anyway.
I know that voice!
__________________
Mark Hatcher
www.hatcherguitars.com

Give me six hours to chop down a tree and I will spend the first four sharpening the axe
Reply With Quote
  #125  
Old 02-28-2021, 12:28 PM
Mark Hatcher's Avatar
Mark Hatcher Mark Hatcher is online now
AGF Sponsor
 
Join Date: Jul 2011
Location: Peterborough, New Hampshire
Posts: 3,776
Default Penelope Cross-over

Here is are a couple pictures to update progress on the Bubinga/Cedar Penelope nylon cross over. The Penelope is one of my first model designs and it's always been my trial guitar on most anything new. It is funny however that there are several features that are common on my other models that I have never done on a Penelope. I have never done a Florentine cut away on a Penelope. The closest I've come was the scoop type cutaway with a Florentine point that I did for my Venetian influenced Olivewood guitar (the irony of a Florentine pointed cutaway on a Venetian style guitar is now just hitting me)



I like the cut of the line on the soundboard so I've let that be the guide for the full Florentine cut-away on this new guitar. Here is a picture of the joined laminated sides receiving the back kerfing:



I have never done an arm bevel on a Penelope so this is another first. I am gluing the top kerfing on here and you can plainly see the Spanish Cedar banana glued in which will provide the support for the arm bevel to come:



I've also have never done a raised fretboard on a Penelope. Since that is now a standard feature on the Penelope steel string guitars and works so well it is certainly being carried over to this cross over.
So what's the improvement with the elevated fretboard? There are two improvements particular to this model. The guitar is a 12 fret so there is more fretboard on the soundboard and when it is raised if provides better access and leverage when fretting above the 12th fret. It is an improvement even if there is a cut away.

The second improvement is a bit more subtle but makes a difference. With some players it is a big difference especially if they are used to playing 14 fret guitars. You see a 14 fret guitar gives you a little more elbow room from the side of your body because you are reaching out further to fret the guitar.
With an elevated fretboard the guitar's neck is cantered out a couple degrees so the strings are pointed down toward the bridge (so the bridge doesn't need to be higher to match the elevation of the fretboard). When the neck is pushed out a little it brings your left arm out a little more from your body and gives you back that elbow room so you may not feel as cramped as you go up the fretboard.

I've heard some people say that a guitar with an elevated fretboard sounds a little more harp like because the strings are pulling up a little more on the bridge. I'm not one of those people that say that. I don't hear it.


Thanks for viewing!
Mark
__________________
Mark Hatcher
www.hatcherguitars.com

Give me six hours to chop down a tree and I will spend the first four sharpening the axe
Reply With Quote
  #126  
Old 02-28-2021, 04:30 PM
Ukulele_Eddie's Avatar
Ukulele_Eddie Ukulele_Eddie is offline
Charter Member
 
Join Date: Feb 2018
Location: Santa Monica, CA
Posts: 424
Default

Quote:
Originally Posted by Nemoman View Post
Shazam!!! That's an incredible set of BRW, Mark!

Can't wait to see you make it into something!

I'm in violent agreement with this. ^^^^
__________________
12-fret Small Body Addict & Sucker for Exquisite Craftsmanship
  • Doerr Trinity Select Signature Swiss Spruce/BRW
  • Wilborn Arum Tunnel 14 Redwood/Ziricote
  • Beneteau 0-12 Sitka/Mahogany
  • Martin 1931 Authentic 00-17
Reply With Quote
  #127  
Old 03-01-2021, 07:25 AM
Archaic Guitars's Avatar
Archaic Guitars Archaic Guitars is offline
AGF Sponsor
 
Join Date: Nov 2020
Location: Indianapolis
Posts: 43
Default

The tail block looks like a pillow, beautiful craftsmanship for something that is barely visible once the guitar is complete.

I look forward to seeing some more progress on the elevated fretboard if that is in the future.
Reply With Quote
  #128  
Old 03-01-2021, 10:37 AM
Mark Hatcher's Avatar
Mark Hatcher Mark Hatcher is online now
AGF Sponsor
 
Join Date: Jul 2011
Location: Peterborough, New Hampshire
Posts: 3,776
Default

Quote:
Originally Posted by Ukulele_Eddie View Post
I'm in violent agreement with this. ^^^^
Thanks for commenting!

Quote:
Originally Posted by Archaic Guitars View Post
The tail block looks like a pillow, beautiful craftsmanship for something that is barely visible once the guitar is complete.

I look forward to seeing some more progress on the elevated fretboard if that is in the future.
Thanks! I round off the end block not so much for ascetics. I have a thing against flat surfaces and sharp edges inside of an acoustic chamber.

The elevated fretboard is coming along well. I've been sorting out the neck wood today. I also started doing further clean up on the inside of the sides:



Thanks again!
Mark
__________________
Mark Hatcher
www.hatcherguitars.com

Give me six hours to chop down a tree and I will spend the first four sharpening the axe
Reply With Quote
  #129  
Old 03-03-2021, 02:33 PM
Mark Hatcher's Avatar
Mark Hatcher Mark Hatcher is online now
AGF Sponsor
 
Join Date: Jul 2011
Location: Peterborough, New Hampshire
Posts: 3,776
Default Dessert Ironwood Preview

I recently started getting desert Ironwood to use for fretboards and trim etc. We recently made the decision to use it on a Tree guitar I have in the works. Here is a preview of this gorgeous wood I am using:



I like how the grain and swirl of the burl texture shows in the char of the branding iron. It makes me think of ways I might take advantage of that in other ways.
__________________
Mark Hatcher
www.hatcherguitars.com

Give me six hours to chop down a tree and I will spend the first four sharpening the axe

Last edited by Mark Hatcher; 03-03-2021 at 08:19 PM.
Reply With Quote
  #130  
Old 03-03-2021, 04:49 PM
Erithon's Avatar
Erithon Erithon is offline
Charter Member
 
Join Date: Feb 2017
Posts: 1,063
Default

Looks fantastic, Mark!
Quote:
Originally Posted by Mark Hatcher View Post
It makes me think of ways I might take advantage of that in other ways.
How so? Some decorative branding in the rosette or endgraft? Or maybe even the headstock? Michael Bashkin does his sand-scorched rosette technique which is pretty cool. It's not the same thing, of course, but I could see one leaning into the texturing of your branding technique.
Reply With Quote
  #131  
Old 03-03-2021, 11:08 PM
kkrell's Avatar
kkrell kkrell is offline
Charter Member
 
Join Date: Jul 2012
Posts: 565
Default

Speaking of decorative branding:

burning Lichtenberg figures into wood flute cases:
https://www.facebook.com/Reviol.Wood...61764644220366

https://www.facebook.com/Reviol.Wood...27884063954185
__________________
Kevin Krell, Executive Director, International Traditional Music Society, Inc.
A non-profit 501c3 charity/educational public benefit corporation
Wooden Flute Obsession CDs
https://www.acousticguitarforum.com/...d.php?t=572579
Personal professional flute for sale/trade: https://www.acousticguitarforum.com/...d.php?t=593659
Reply With Quote
  #132  
Old 03-06-2021, 12:21 AM
Dustinfurlow Dustinfurlow is offline
Charter Member
 
Join Date: Jul 2016
Location: Virginia
Posts: 2,077
Default

Your work and wood selection is seriously some of my favorite in the business, Mark! Hope all is well with you.
__________________
Dustin Furlow

-Award-winning Songwriter/Guitarist, Photographer/Video Freelancer
-Proudly endorsed by Larrivee Guitars, DíAddario Strings, G7th Capos and K&K Sound
-Music on Spotify and YouTube: www.youtube.com/dustinfurlow
-"Woodscapes" Modern Solo-Guitar Album
available at www.dustinfurlow.com/shop
Reply With Quote
  #133  
Old 03-06-2021, 03:45 PM
Mark Hatcher's Avatar
Mark Hatcher Mark Hatcher is online now
AGF Sponsor
 
Join Date: Jul 2011
Location: Peterborough, New Hampshire
Posts: 3,776
Default

Quote:
Originally Posted by Erithon View Post
Looks fantastic, Mark!

How so? Some decorative branding in the rosette or endgraft? Or maybe even the headstock? Michael Bashkin does his sand-scorched rosette technique which is pretty cool. It's not the same thing, of course, but I could see one leaning into the texturing of your branding technique.
Thanks Erithon, The thing I like about scorching wood is the darkening goes deep into the wood so it doesnít just sand off when prepping for finish. The thing I most like about this Ironwood is the texture of the wood grain show almost as much as a softwood texture shows after you torch it and then wire brush it.
My first thought was what a wonderful looking textured black binding set this would be. An element on a headstock etc. Iíll be playing with this for a bit and see if I canít work it into a proposal on a custom build when the time comes.


Quote:
Originally Posted by kkrell View Post
Speaking of decorative branding:

burning Lichtenberg figures into wood flute cases:
https://www.facebook.com/Reviol.Wood...61764644220366

https://www.facebook.com/Reviol.Wood...27884063954185
Thanks for the link. I like how much detail there is.

Quote:
Originally Posted by Dustinfurlow View Post
Your work and wood selection is seriously some of my favorite in the business, Mark! Hope all is well with you.
Thanks Dustin! Iím doing great and business has been very good. I seem to attract customers that want some wonderful woods and itís my pleasure to provide them!

Thanks for the comments!
Mark
__________________
Mark Hatcher
www.hatcherguitars.com

Give me six hours to chop down a tree and I will spend the first four sharpening the axe
Reply With Quote
  #134  
Old 03-06-2021, 05:11 PM
TomB'sox's Avatar
TomB'sox TomB'sox is offline
Moderator
 
Join Date: Dec 2014
Location: Upstate Ny via Minnesota, soon heading to Texas
Posts: 9,222
Default

Quote:
Originally Posted by Mark Hatcher View Post
Thanks Erithon, The thing I like about scorching wood is the darkening goes deep into the wood so it doesnít just sand off when prepping for finish. The thing I most like about this Ironwood is the texture of the wood grain show almost as much as a softwood texture shows after you torch it and then wire brush it.
My first thought was what a wonderful looking textured black binding set this would be. An element on a headstock etc. Iíll be playing with this for a bit and see if I canít work it into a proposal on a custom build when the time comes.




Thanks for the link. I like how much detail there is.



Thanks Dustin! Iím doing great and business has been very good. I seem to attract customers that want some wonderful woods and itís my pleasure to provide them!

Thanks for the comments!
Mark
It is nice to have customers always willing to take on an experiment right!
__________________
PS. I love guitars!
Reply With Quote
  #135  
Old 03-07-2021, 10:30 AM
Mark Hatcher's Avatar
Mark Hatcher Mark Hatcher is online now
AGF Sponsor
 
Join Date: Jul 2011
Location: Peterborough, New Hampshire
Posts: 3,776
Default

Quote:
Originally Posted by TomB'sox View Post
It is nice to have customers always willing to take on an experiment right!
Customers do vary on how adventurous they are. I hope I'm past the experiment stage before offering them a new alternative.
I like to try something new with every guitar but I do a lot of dry runs on those new things. The bottom line is I just don't want to do something new that looks like it was the first time I ever did it!
__________________
Mark Hatcher
www.hatcherguitars.com

Give me six hours to chop down a tree and I will spend the first four sharpening the axe
Reply With Quote
Reply

  The Acoustic Guitar Forum > General Acoustic Guitar and Amplification Discussion > Custom Shop

Thread Tools





All times are GMT -6. The time now is 02:06 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2021, vBulletin Solutions Inc.
Copyright ©2000 - 2021, The Acoustic Guitar Forum
vB Ad Management by =RedTyger=