#1
|
||||
|
||||
Gurian tool?
Has anyone got the special tool for putting the pins back into a Gurian neck joint?
__________________
Peace, Jimmy Optima dies, prima fugit |
#2
|
|||
|
|||
From Frets.com
"While it's handy to have the "real" tool, a simple block of lead can be used to drive the pins in just as well." http://www.frets.com/FretsPages/Luth...rianreset.html Looking at the tool on the above site, it appears to be similar in size and shape to the tongs used to lift mason jars from a canning bath. Maybe one of those could be altered/repurposed? |
#3
|
||||
|
||||
Quote:
I’ve got one of the canning tongs. I think it might not take a lot of pressure. I’ve seen the frets link, just wondering if anyone had the tool.
__________________
Peace, Jimmy Optima dies, prima fugit |
#4
|
||||
|
||||
Have you seen Mike McConnville on YouTube redoing a Gurian neck?
His business is called StringTech Workstations.
__________________
1952 Martin 0-18 1977 Gurian S3R3H with Nashville strings 2018 Martin HD-28E, Fishman Aura VT Enhance 2019 Martin D-18, LR Baggs Element VTC 2021 Gibson 50s J-45 Original, LR Baggs Element VTC ___________ 1981 Ovation Magnum III bass 2012 Höfner Ignition violin ("Beatle") bass |
#5
|
||||
|
||||
Thanks for that! I’ll check it out.
__________________
Peace, Jimmy Optima dies, prima fugit |