#226
|
|||
|
|||
Here's my latest. ToneDexter with Boss CP-1X and PolyTune3 in the effects loop.
__________________
Website: http://www.buzzardwhiskey.com |
#227
|
|||
|
|||
Small Board from Ammoon!
A small board from Ammoon (£23 GBP with soft case).
Added some taller rubber feet. Sonic Research ST-300 mini > Diamond CPR-1 > Boss OC-3 > Diamond MLJ > Carl Martin 3 Band Parametric Pre-Amp into a Genz Benz Shen 150LT Powered by a Harley Benton Powerplant Jr which fits in a strange but practical place! Used 'links' with cable ties to fit all pedals (due to feet/rubber bottom etc.) except tuner which is velcro. Power supply held with ties too. The ST-300 tuner is great to add a sweetened tuning (James Taylor) for my Yairi DY75, whilst using a standard tuning for my Takamine F365S. Only pedal I'd like to add would be a Ditto Jam. I'm curious to see if it can keep time from the guitar rather than the drums...... [IMG][/IMG] Last edited by JazzyJ; 01-26-2020 at 09:38 AM. |
#228
|
|||
|
|||
Tonedexter send/return
Quote:
|
#229
|
|||
|
|||
Here's the board I'm using right now:
|
#230
|
|||
|
|||
That's a Boss DM-2w delay pedal. It's going into the Effects Loop on the ToneDexter. Spent $1 on an empty cigar box to mount them. The wall warts and an 8' extension cord are inside the box. I put some rubber feet under the cigar box.
__________________
You're talking to me. I hear music. And the whole world is singing along https://marshallsongs.com/ https://www.reverbnation.com/marshal...ther-tragedies http://www.youtube.com/watch?v=x-UGW...neHaUXn5vHKQGA http://www.youtube.com/watch?v=dGxDwt26FZc http://www.cdbaby.com/cd/marshallsongs http://www.myspace.com/marshallhjertstedt |
#231
|
|||
|
|||
I'm trying to make two channel fingerstyle pedalboard nearly five years and i think its finished
[IMG]IMG_2623 by murattunali, on Flickr[/IMG] Last edited by murattunali; 01-28-2020 at 09:17 PM. |
#232
|
||||
|
||||
Sweet and clean. Love it!
__________________
Martin DC-18E (Ambertone) Martin HDC-28E Martin D-18 (2015) Collings D1 Traditional Emerald X20 Fender CS '63 Telecaster Custom Collings I-35LCV Collings I-30LC Collings 290 www.heartsoulaz.com |
#233
|
|||
|
|||
|
#234
|
|||
|
|||
Yes very clean and nice board! Beautiful guitar as well! I am assuming that is the Martin Ambertone? What pickup is in that guitar and how does the baggs session work? I was considering buying one.
|
#235
|
|||
|
|||
Heres my latest.
felix ,hx stomp and morningstar mc6. pedal board is an accell 10x10. it has a power supply mounted undeneath that has a 120 plug. makes for a nice clean setup. Last edited by varmonter; 01-30-2020 at 07:11 AM. |
#236
|
|||
|
|||
Quote:
I really like the Session pedal. I had a Session DI in the past and sold it to try something else and ended up missing it. That comp/EQ knob takes what I don't like hearing in an acoustic pickup and dials it almost all the way out. Also, whatever EQ/compression it's doing ends up making the guitar fit really well in a band mix. Also, the other guitar I play a lot is a Taylor 314e and the Session is just a match made in heaven w/ the ES2 system IMO. The comp/eq knob gets rid of the quack and the saturation knob thickens up the sound. |
#237
|
|||
|
|||
Quote:
Just curious, what strings are you playing on that Taylor? |
#238
|
|||
|
|||
I have 3 Taylor guitars with es2 and found the Fishman platinum pro worked the best. I had the Session DI at the same time to compare. I also use the Fishman toneDeq; I got the same results with the es2 also.
|
#239
|
|||
|
|||
Acoustic Pedalboards - Post yours!!
I use a Helix Floor. Here’s a picture of the signal chain for my dual source Rare Earth Blend + k&k, input through returns 3&4.
https://i.imgur.com/ck7r10T.jpg The volume blocks at the beginning (bypassed) are set to -60db, I turn them on/off in different snapshots if I want just one pickup or the other. The compressor is also bypassed in this snapshot, but can be engaged in others.
__________________
'10 Wechter 5712c - Fishman Rare Earth '13 Jaffrey #26 - Malaysian Blackwood! '21 Gretsch 5622 '22 Furch Red Pure G-LR - Barbera Soloist ST-300 Mini + DIY mic preamp Last edited by rschultz; 01-30-2020 at 12:20 PM. |
#240
|
|||
|
|||
Quote:
Thank you, Varmonter!
__________________
Rodrigo Pandeló 2005 Martin HD28 with K&K Trinity; 2012 Cordoba C10; Grace Design Felix 2; Sennheiser MD441; DPA 4099 Core; DPA 4018L; Bose L1 Compact; QSC Touchmix 8; QSC K10.2; Neumann u87ai; Neumann KMS105; Neumann KM184 (matched pair). http://www.youtube.com/rodrigopandelo http://www.rodrigopandelo.com http://www.instagram.com/rodrigopandelo São Paulo/Brazil |