#1
|
|||
|
|||
Bob Colosi bridge pin size for 2017 J45 Standard?
I know the size's tend to be a little all over the place for Gibsons but can anyone point me to what size of pins I would need to order to fit my 2017 J45 Standard?
Colosi lists the following sizes: 1T, 1.3T, or 2A Any help would be greatly appreciated!
__________________
2016 Taylor 324 Mahogany/Tasmanian Blackwood 2017 Gibson J-45 Standard 1985 Gibson J-45 G7th Capos |
#2
|
|||
|
|||
I don't know, in fact I got the wrong size on my 2014 J-45 Standard, so I'm going to keep an eye on this thread.
|
#3
|
|||
|
|||
Quote:
YMMV. |
#4
|
||||
|
||||
Ask Bob. He’s the expert and responds quickly. For my 2018 J-45 he sent me size 2a.
__________________
Walker Clark Fork (Adi/Honduran Rosewood) Edmonds OM-28RS - Sunburst (Adi/Old Growth Honduran) |
#5
|
|||
|
|||
You will need the size 2A.
|
#6
|
|||
|
|||
This. Bob is great, quick to respond to questions and his work is first class all the way. I've purchased at least a dozen sets of pins from him (for Martins, can't speak to Gibson sizing) and every one has fit perfectly, plus they are beautiful - and my guitars immediately featured better sustain and clarity compared to the plastic pins that Martin *still* uses on most of their guitars. Highly recommended!!
|