#1
|
|||
|
|||
Mic Mechanic 2 quick quetion
(I meant question) Hey Mic Mech 2 owners, the Tone button, I know there's red and green colors, mine is on red, how do I change to green? Thanks for any help..
|
#2
|
|||
|
|||
Hold the Tone button and press the footswitch.
__________________
Martin D-18MD, Martin OM-21, Martin CEO-7, Martin J-40, Martin 000-1, Guild D-55, Guild D-140, Gibson SJ-200, Gibson Hummingbird, Gibson Frank Hannon Love Dove, Gibson Southern Jumbo, Furch Gc-SR Red Deluxe, Furch Yellow Masters Choice, Larrivee P-03ww, Kawaii piano, mandolines, drumsets, doublebass, Fender Jazzbass, ... |
#3
|
|||
|
|||
Thanks for the info, I tried but still red. I know it's for 2 different tones, so I just wanted to check the other. There's not much info on this button but I do like it..
|
#4
|
|||
|
|||
The tone light is always Red... the green LED up top right is the battery LED, not the tone
|
#5
|
|||
|
|||
Quote:
https://youtu.be/-MW0_GcV3QE If you have this pedal, give a try changing its mode by pressing and holding down the 'TONE' and then pressing once on the 'FOOT SWITCH' to toggle the color Last edited by MarkF_48; 03-24-2023 at 07:55 AM. |
#6
|
|||
|
|||
Just confirmed mine doesn’t change. The red does briefly flash on first press. Did some plug in while holding down buttons but nothing.
|
#7
|
|||
|
|||
Okay, thanks everyone. I did figure it out, as stated earlier; hold tone button down and press switch, the tone button lights up straight, if you want a less of that tone then do the process again ,the tone button blinks once and then solid, when activated. Now mine is still red but I understand the process now.
|
#8
|
||||
|
||||
Quote:
Steve
__________________
Still crazy after all these years. |