|
|
#1
05-16-2011, 07:55 AM
|
|||
|
|||
taylor 514 to high action
Problem fixed
delate Last edited by barabasmnich; 05-17-2011 at 01:01 PM. 
|
|
#2
05-16-2011, 08:05 AM
|
||||
|
||||
|
Without looking at it or seeing pix its not possible to diagnose.
Put a straight edge on the frets and see if there is a dip. With Truss rod adjusting and A proper set up may only be necessary. From 97 is a glued in neck I am pretty sure. From what you describe it sounds like it is a candidate for a couple hundred dollar neck reset. Can you return it?
|
|
#3
05-16-2011, 08:55 AM
|
|||
|
|||
|
Without seeing the guitar it's hard to know but my guess is that the string slots in the nut could be filed a little deeper and that the saddle could be lowered as well. Probably not much but enough to make the guitar more comfortable to play.
Take it to a shop that specializes in acoustic instruments.
__________________
Taylor 512...Taylor 710B...Blueridge BR163...Blueridge BR183a...all with K&K's & used w/RedEye preamps Seagull CW w/Baggs M1 pickup...National Vintage Steel Tricone...SWR California Blonde Amp
|
