#1
|
|||
|
|||
For Luthiers, can you use Spanish Cedar for a drednaught?
My question is could you use Spanish Cedar for the top back and sides of a 14 fret Slope D guitar? I already know it is not cedar with nearly the same properties as mahogany. I just wanted to know with a standard x bracing pattern if there would be enough stability? I am trying to stay away from Honduran and would like to commission one to be built.
Thank you for any repies. Dan |
#2
|
||||
|
||||
Quote:
|
#3
|
|||
|
|||
It can probably be done. That doesn't necessarily make it a good idea.
Why do you want to get away from mahogany? If you're trying to avoid using a tropical hardwood that's in short supply then cedro is not the way to go. Aside from the fact that it's usually much softer and weaker than mahogany, it's also no more common or easy to get, as I understand it. It's also usually soft enough to make it hard to bend for the sides without cracking, or crushing on the inside of the bend. Why not go with a domestic wood, such as cherry or walnut? Cherry is a really good substitute for Caribbean mahogany, and walnut is pretty close to Honduras mahogany. Either of them is 'way easier to work with than cedro, and makes a very sweet guitar. |
#4
|
|||
|
|||
I read about the Spanish Cedar and thought it may be a good alternative.. Honduran is getting rare and very expensive. I know Martin made a guitar from Spanish Cedar but not for the top. It was the Martin MC Adirondack 1 but was not a dread. I did a lot of reading but trying to find something with Mahogany tone and workability and stability is tough. I wanted to stay away from a Spruce top and go all hog but with custom touches. I guess I'll keep reading and see what I find. BTW, I love the honey shade of an unstained mahogany and that was another reason for the S.Cedar.
Thanks, Dan |
#5
|
||||
|
||||
Interesting wood.
I have a Jumbo coming from John Kinnaird with SC back and sides. It will have a Western Red Cedar top. And a bunch of bells and whistles, too!
Unless I am mistaken John has a back and sides of SC stashed.... I did a lot of research and found that SC is a very LIGHT wood and as you found it sounds a lot like Mahogany. And I like the tone of my JK Hog/Cedar custom a LOT. Link to my SC thread: https://www.acousticguitarforum.com/...d.php?t=518168 Maybe John will chime in here... Best on your build! Paul
__________________
3 John Kinnaird SS 12c CUSTOMS: Big Maple/Cedar Dread Jumbo Spanish Cedar/WRC Jumbo OLD Brazilian RW/WRC R.T 2 12c sinker RW/Claro 96 422ce bought new! 96 LKSM 12 552ce 12x12 J. Stepick Bari Weissy WRC/Walnut More |
#6
|
||||
|
||||
Not a dread, but I have a Spanish Cedar OO that is quite nice.
__________________
PS. I love guitars! |
#7
|
|||
|
|||
Thanks for the replies// Maybe theres still hope for an all SC guitar???
|
#8
|
|||
|
|||
SuperSoft II will help with the bending if needed but being a dread without the narrow waist you may not be too bothered. I have been bending spruce and have been getting away with it.
__________________
Fred |
#9
|
|||
|
|||
Thanks but I wouldn't be building myself. It would be a commissioned build. Working out a few details yet. I may just give in an go all Honduran but being on Cites and limited supply is the reason I wanted to go Spanish Cedar which is in the Hog family...distant cousin.
|
#10
|
||||
|
||||
Quote:
|
#11
|
|||
|
|||
Thanks Tim. It depends if the builder will have it in stock.
|