#1
|
|||
|
|||
Dull Nut Files
I bought a set of these nut files. I have had approx 6 or so uses from them and it seems they have become quite dull. Maybe the quality is not up to par but how long, in general, should nut files last?
http://www.japarts.ca/Uo-Chikyu/Uo-C...-Nut-Files.asp
__________________
Larrivee OM-03 Seagull SWS Maritime Mini Jumbo Alvarez AP70SB Parlor Alvarez AF60SHB Seagull Concert Hall Mahogany Harmony H1215. 1953 An 80 year old Kay (approx) Epiphone ES-339 Epiphone Les Paul 50's Standard 3 home built Strat's |
#2
|
|||
|
|||
I've setup (NOT started from scratch) 5 nuts with my set and they seem to be cutting just fine.
When you say "quite dull", are they unable to cut? Is it taking 5 swipes instead of 2? I ask, because in my (limited) experience in reworking nut slots, I'd rather have a file cut away material more slowly. |
#3
|
|||
|
|||
They should last for many years.
The fine teeth of the files do clog with whatever material you are filing. That might be what you are experiencing. I use a thick/plush piece of carpet to lay guitars on while working on them. I wipe the teeth of the files across the surface of the carpet and find that doing so cleans the material out of their teeth. The teeth can potentially get gummed up if you are filing uncured glue such as epoxy or CA glue. |
#4
|
|||
|
|||
Watch out for STAINLESS steel nut files - those I've seen are not fully hardened as standard steel files. They hav an extremely short life. . .
__________________
Cheers, Frank Ford |
#5
|
|||
|
|||
Do an Internet search on "Chemical Sharpening." I've never done it with nut files but it can work a charm on regular files.
|
#6
|
||||
|
||||
It may seem remedial to you, but when using a file it is important to put down pressure on it ONLY on the push stroke, and lift it slightly on the pull stroke. Otherwise the cutting edges will get turned and dull the file. Learned this in 8th grade shop, a program which is less prevalent these days, I’m told. I have been using the same StewMac nut files for 25 years and have done many hundreds of guitars and basses with them.
|
#7
|
|||
|
|||
I have used the Stew Mac files for close to the same duration as Bruce. One of them (0.032) wore out after a few years, but the replacement is holding up like the others. These are the flat sided gauged files that are the same width on both edges. I also have the thicker ones with the tapered sides; those are different gauge on the two edges. I have not used them nearly as much, but they seem to be just as durable.
|
#8
|
|||
|
|||
Quote:
Piece of scrap copper cleans them nicely. A file cleaning brush is also available. I use both but actually prefer copper. "Good" files usually last about five years in my jewelry studio working silver, gold, and copper. YMMV... |
#9
|
|||
|
|||
I've been able to extend the life of some files, including my nut files, by first cleaning them
well, then soaking in household vinegar overnight. |
#10
|
|||
|
|||
Quote:
I haven't tried copper: thanks for the tip. It might work well for other files with metal filings, such as fret "dust". |
#11
|
|||
|
|||
Every so often I box up a load of files and send them off for sharpening to
Boggs Tool Co. All I have to do is give them a note with a count of the number of files in the package. They sharpen them all and send them back with a modest bill. After they use their 120-year-old steam/'abrasive blast process to sharpen the files they give them a quick test. Those that don't pass the test get red paint on the end, and come back at NO charge. Even those that don't pass are far sharper than they were before. They will do ANY kind or size of file - nut, fret round, rasp - whatever.
__________________
Cheers, Frank Ford |
#12
|
|||
|
|||
Thanks to all for the info. I learned something today. Especially putting pressure on the down stroke only. I will try cleaning these as some had suggested and see how that works.
__________________
Larrivee OM-03 Seagull SWS Maritime Mini Jumbo Alvarez AP70SB Parlor Alvarez AF60SHB Seagull Concert Hall Mahogany Harmony H1215. 1953 An 80 year old Kay (approx) Epiphone ES-339 Epiphone Les Paul 50's Standard 3 home built Strat's |
#13
|
|||
|
|||
Quote:
|