#1
|
|||
|
|||
Madsen Koa Jumbo
This will be a first thread on the Acoustic Guitar Forum for Madsen Guitars, if there are any mistakes or critiques please let me know. That being said, I'm not new to the luthier industry but new to using the Forum to display my work. In all truths I've paid to be a sponsor for three years and been too busy or reclusive to draw attention on this platform. After some encouragement from other users of the Forum, I have decided its about time to contribute to the discussion on here. So here we go!
This custom order was placed last May and I've been excited all summer to get started on it. The customer who this is being built for had been searching for a very outstanding set of Koa for this specific build, and boy did we find a good one! He has several custom builds from other distinguished luthiers and I'm very appreciative to have an opportunity to get one of mine among his stable of guitars. There are some other special items that will be included in this build along the way that should be interesting including, a custom inlay for the rosette/inner Soundhole as well as a corresponding Baritone Ukulele that will be built along the way from the scrap pieces of Koa. Stay tuned for more photos and details in the coming days and weeks! Madsen #142 Body Shape: Jumbo with Florentine Cutaway Scale: 25.5" Nut-Saddle Width: 1.75"-2.125" Soundboard: Bear Claw AAA Engelmann Spruce Back & Sides: Highly Figured "Stress" Koa Brace Wood: Red Spruce Binding Material: Brazilian Rosewood w/b-w-b Purfling: Black/Maple/ Black with Koa accent Body Details: Arm Bevel in Brazilian Rosewood Rosette: Pearl inner and Outer Rings- Brazilian Back Ground with center Koa Ring with Looping Mother of Pearl accent around center ring Fingerboard: Ebony with Flamed Koa border line inside of Ebony binding Headstock: Snake head shape with Ebony Veneer and Koa binding trim Neck: 5-Piece Mahogany- Maple- Brazilian Rosewood- Maple- Mahogany Truss Rod: 2-Way Rod with dual graphite rods Bridge: Brazilian Rosewood with Bone inlayed Pins 3 degree Tuners: Gotoh 510 Delta 21:1 Ratio Frets: EVO Gold Medium Finish: Seagrave Catalyzed Urethane Gloss body and Neck "Stress" Koa Back - Quite Impressive Stuff [IMG]Madsen Parts and Progress for Jumbo #142 by Andrew Madsen, on Flickr[/IMG] Bear Claw AAA Engelmann Spruce (Photo is taken outside with Naphtha wiped on) [IMG]Madsen Parts and Progress for Jumbo #142 by Andrew Madsen, on Flickr[/IMG] "Stress" Koa Sides pre-bent (Sides will be laminated to another set of Koa for stability, these pieces want to brake just being held) [IMG]Madsen Parts and Progress for Jumbo #142 by Andrew Madsen, on Flickr[/IMG] 5-Piece Neck and Brazilian Center Strip [IMG]Madsen Parts and Progress for Jumbo #142 by Andrew Madsen, on Flickr[/IMG] [IMG]Madsen Parts and Progress for Jumbo #142 by Andrew Madsen, on Flickr[/IMG] Koa Back all Braced and Center Seamed with Red Spruce [IMG]Madsen Parts and Progress for Jumbo #142 by Andrew Madsen, on Flickr[/IMG] [IMG]Madsen Parts and Progress for Jumbo #142 by Andrew Madsen, on Flickr[/IMG] Jumbo Florentine Cutaway Body Template [IMG]Madsen Parts and Progress for Jumbo #142 by Andrew Madsen, on Flickr[/IMG] Baritone Ukulele Koa Back and Engelmann Spruce Soundboard [IMG]Madsen Parts and Progress for Jumbo #142 by Andrew Madsen, on Flickr[/IMG] [IMG]Madsen Parts and Progress for Jumbo #142 by Andrew Madsen, on Flickr[/IMG] Last edited by Madsenguitars; 10-29-2019 at 01:09 PM. Reason: typo |
#2
|
|||
|
|||
Welcome to the forum--or to the posting aspects, anyways!
Looks like you're off to a great start with an awesome set of woods. Looking forward to following along...
__________________
2013 Stehr Auditorium (Carpathian/Myrtle) 2015 Stehr Auditorium (Adi/BRW) 2020 Baranik Meridian (Blue Spruce/Manchinga) 2020 Wilborn Arum (Tunnel 14/Coco) 2021 Kinnaird Graybeard (BC Cedar/Bog Oak) 2022 Kinnaird CS Student Build (Adi/Padauk) 2023 Kinnaird FS (Italian/Koa) |
#3
|
||||
|
||||
I concur, any builds are always fun to watch, and wow what a set of Koa and the Bear Claw spruce is an amazing piece also. This should be beautiful when finished.
__________________
PS. I love guitars! |
#4
|
||||
|
||||
Holy Smokes!
Quote:
Paul
__________________
4 John Kinnaird SS 12c CUSTOMS: Big Maple/WRC Dread(ish) Jumbo Spanish Cedar/WRC Jumbo OLD Brazilian RW/WRC Big Tunnel 14 RW/Bubinga Dread(ish) R.T 2 12c sinker RW/Claro 96 422ce bought new! 96 LKSM 12 552ce 12x12 J. Stepick Bari Weissy WRC/Walnut More |
#5
|
|||
|
|||
Looks like this will be quite a pair of instruments! Looking forward to seeing both of these builds come together.
|
#6
|
|||
|
|||
Quote:
https://www.amazon.com/photos/shared...2wJ26rQN6pBQCc |
#7
|
|||
|
|||
Just as a clarification, the drawing of the cutaway on this template is florentine, not venetian. A handy way to remember them is florentine ends with 'tine' like the tines on a fork – pointy.
So will your guitar have a florentine or venetian cutaway? |
#8
|
|||
|
|||
Quote:
Sorry for the confusion, it is a Florentine cutaway. |
#9
|
|||
|
|||
IMG_0105.jpg
Koa Sides bent and Laminated to another layer of Koa IMG_0111.jpg Tail Block and sides glued up IMG_0115.jpg Neck Block Assembly IMG_0120.jpg Top Kerfed and Blocks in IMG_0168.jpg Brazilian Rosewood- Koa - Pearl Rosette IMG_0172.jpg Rosette and Sound-hole trim installed |
#10
|
||||
|
||||
Nice loot wood! Looking forward to seeing it progress
__________________
_______________________ Peter M. Cornerstone Guitars www.cornerstoneguitar.com Ukuleles... www.cornerstoneukes.com |
#11
|
||||
|
||||
Love that koa! Thanks for starting the thread.
|
#12
|
|||
|
|||
Quote:
|
|
Tags |
"stress" koa, bear claw, jumbo, madsen guitars |
|