#1
|
|||
|
|||
NGD thrift store bass find
I've been thinking about getting a bass to occasionally play with bluegrass and such...stumbled across this 1996 Fender Squier Jazz Bass at a thrift store for $50! Of course next stop was a nearby pawn shop for a practice amp and cord... aside from the action being a little low, it sounds great. Bet it will sound even better when I put some flatwound strings on it.
IMG_0686.jpg
__________________
Martin J-40 (1991) Yamaha FG-405 (1988) |
#2
|
|||
|
|||
Quote:
Once in a very great while I’ll luck upon something exceptional, but most of what I see in those settings is borderline pathetic... whm |
#3
|
|||
|
|||
Quote:
Good luck - use it well, often and LOUD...
__________________
"Mistaking silence for weakness and contempt for fear is the final, fatal error of a fool" - Sicilian proverb (paraphrased) |
#4
|
|||
|
|||
Quote:
It's definitely a labor of love -- I've been regularly visiting thrift stores for nearly 30 years, and for every gem I find I pass one 30, 40, 50 more. Not just instruments (this is the first I've ever bought at a thrift store), but cameras, clothing, dishes, whatever. Personally I just enjoy the thrill of the hunt and finding the occasionally great deal. Most of what i see is as you say - unplayable crap. Like the Washburn mandolin I saw today with about a 1" action at the 12th fret!
__________________
Martin J-40 (1991) Yamaha FG-405 (1988) |
#5
|
|||
|
|||
Quote:
I am definitely all about the heavy strings, but not so knowledgeable about bass to know all the little details. I ordered a set of Rotosound 50-110 flatwounds earlier today and we'll see if they sound better -- his thing appears to still have the factory roundwounds on it. I'm not likely to pay a tech to do anything to a $50 bass I'll mostly be toying with, but I did already raise the bridge a bit and that seems to have taken care of the buzz I was getting. The neck homely looks like it could use a little more relief, so I'm counting on the heavy strings to help with that, even if I have to lower the bridge again a bit. I don't have a particularly light touch, but not too heavy either. For now I found a 15W Behringer Thunder-something amp that doesn't get all that loud, but it will do for practice and playing with a few acoustic instruments I think.
__________________
Martin J-40 (1991) Yamaha FG-405 (1988) |
#6
|
|||
|
|||
I highly recommend La Bella Low Tension Flats (LTF's). They have a real nice Flatwound thump after break in. I keep then on a thin neck Carvin bass, no damage what so ever.
|
#7
|
|||
|
|||
What's with the green bridge/saddle?
__________________
Mike My music: https://mikebirchmusic.bandcamp.com 2020 Taylor 324ceBE 2017 Taylor 114ce-N 2012 Taylor 310ce 2011 Fender CD140SCE Ibanez 12 string a/e 73(?) Epiphone 6830E 6 string 72 Fender Telecaster Epiphone Dot Studio Epiphone LP Jr Chinese Strat clone Kala baritone ukulele Seagull 'Merlin' Washburn Mandolin Luna 'tatoo' a/e ukulele antique banjolin Squire J bass |
#8
|
|||
|
|||
That's a bit of pool noodle I cut off to try out as a mute. I'll be looking for something less conspicuous to replace it!
__________________
Martin J-40 (1991) Yamaha FG-405 (1988) |
#9
|
||||
|
||||
It's not a saddle (that's the silver you see below it--all part of the bridge), but a piece of foam. It dampens the strings and gives them more of that double bass thud. In addition to the flatwound strings schneidan mentioned, I imagine this contributes to achieving the double bass bluegrass tone he's after.
|
#10
|
|||
|
|||
Quote:
It's getting there, for sure, with the heavy flatwounds. I think a stiffer foam would help, though, and probably positioning it further up toward the bridge pickup. Any suggestions for sources of cheap, think, heavy, black foam welcome!
__________________
Martin J-40 (1991) Yamaha FG-405 (1988) |
#11
|
|||
|
|||
There’s a piece of specialized musical equipment that can help tone down the vivid swimming pool green foam you’ve got there: it’s called a black Sharpie marker! Very technical stuff, requiring years of training and supervised simulator experience before you’ll be allowed to deploy one in real life...
Seriously, a few strokes of a black Sharpie and your Surf Green foam insert will become suitably solemn and serious and less of a visual distraction. Hope this helps. Wade Hampton Miller |
#12
|
|||
|
|||
Quote:
That's the only instrument I play professionally! It was my first thought, but even though it's just a Squier I didn't want to risk it leaving any marks on the finish. The pool noodle foam has a new problem now, though -- after a couple weeks under the strings it has deformed so it doesn't really exert any pressure on them any more, so I've got to find something else anyway. Ordered a few different types of foam and will experiment.
__________________
Martin J-40 (1991) Yamaha FG-405 (1988) |
#13
|
|||
|
|||
Something that just now occurred to me is that there’s a chance that the foam could have a chemical reaction to the finish. If the bass has a polyester-based finish it won’t be a concern, but you might want to consider placing a thin layer of felt or moleskin between the bottom of the piece of foam and the top.
Both can be found with self-adhesive backings. You can get that green felt in most crafts stores and in the crafts and fabric section of Walmart, and moleskin can be found in well-stocked pharmacies and medical supply stores. Just a thought - it might not be necessary with the finish on this instrument, but if it turns out to be needed you’ll be glad you took care of it. Hope this helps. Wade Hampton Miller |
#14
|
|||
|
|||
Quote:
That's a good thought. I even have some moleskin in my medicine cabinet. Just got a think chunk of firm black foam sold as a kneeling pad in the mail today; I'll see what I can gin up this weekend.
__________________
Martin J-40 (1991) Yamaha FG-405 (1988) |