Pedal Board Cable Recs - Page 2

Chriscom · #16 10-02-2021, 09:52 AM

Quote:

Originally Posted by KevWind

Like jamison162 said DYI Evidence Audio Monorail with Evidence screw in solderless Right Angle plugs are very hard to beat for quality sound and ease of construction...

Thank you for posting those photos, helps me to see how an excellent, squared-away board is arranged and assembled.

Perchman · #17 10-03-2021, 07:11 AM

The Bill and Becky Lawrence Wilde cable package with solderless connectors works well too. You cut to your length and install connectors with Allen wrench.

KevWind · #18 10-03-2021, 07:52 AM

Quote:

Originally Posted by Chriscom

Thank you for posting those photos, helps me to see how an excellent, squared-away board is arranged and assembled.

As an additional note, the yellow things are just small zip ties,, and there are also some black stick on 3 M Zip Tie holders

https://www.amazon.com/dp/B07NYNVHZY...NsaWNrPXRydWU=

jamison162 · #19 10-03-2021, 10:49 AM

Quote:

Originally Posted by Perchman

The Bill and Becky Lawrence Wilde cable package with solderless connectors works well too. You cut to your length and install connectors with Allen wrench.

Yes! I used those for years until EA Monorail. Are the Wilde cables/connectors still available? Is Becky still selling them?....their website has not been updated in years and I don't see any "packages" available. Only single cables with two connectors.

EZYPIKINS · #20 10-05-2021, 06:07 AM

Quote:

Originally Posted by jamison162

Low capacitance, too low for me. They always sounded too bright and thinned out my tone. Now, if you are running 20' of cable on your board....that capacitance may add up and balance out.

I ran 20' from guitar to board. 20' from board to amp, for electric.

20' to board with Radial JDI out to mixer, for acoustic.

Perchman · #21 10-05-2021, 05:38 PM

Sorry for the Lawrence cable kit recommendation. It doesn’t appear that is available anymore. I should have looked before I wrote that. Sorry

Petty1818 · #22 10-05-2021, 05:47 PM

If you want to avoid soldering then it's hard to beat Evidence Audio cables. They sound great and unlike other brands, the connection is rock solid.

Perchman · #23 10-07-2021, 09:18 AM

You might be able to get Redco to do it. They custom build cables to your specs, you choose the cable (Mogami, Canare, Gotham etc) and the connectors. If you know what lengths you want, I’d guess they’ll do it but you might have to call because I don’t think their automated custom cable builder program goes down into inches. They do excellent work though. You can build a Mogami Gold for almost half price.