//SOLD// Audio Sprockets ToneDexter Ultimate Bundle with Shure SM81 and A-B-Y Cable

[Steely Glen]

The ultimate ToneDexter bundle. Everything you need to create proprietary WaveMaps on your favorite instruments and harness mic'd sound for your live setting. SOLD. Price it out and this is should put you ahead quite a bit as opposed to buying the items individually.

Bundle includes Audio Sprockets ToneDexter preamp and EQ pedal in all original packaging with power supply and manual. Additionally, included is perhaps the best small condenser microphone for this unit: the famed Shure SM81. Also included is an SD card to store WaveMaps and load firmware updates and a custom made A/B/Y cable to use in the ToneDexter's effects loop.

From Audio Sprockets: "ToneDexter is an amazing new pro preamp for acoustic guitar, violin, upright bass, mandolin and more, that restores the missing body sound to an instrument’s piezo pickup.ToneDexter stores WaveMaps® of your studio mic sound that you can recall when using just your pickup. The WaveMaps transform the pickup signal so that it sounds like a mic—lush, resonant, and natural. You can store WaveMaps of different mic positions and different mics, for each of your instruments."

SPECS:

• Works on any acoustic instrument, with most active or passive piezo pickup systems
• Stores 22 custom WaveMaps, selectable via 11 position rotary switch and bank select switch
• Mute switch that activates a built-in high precision tuner, accurate to within 1 cent
• Boost switch for solos with 0-8dB of settable gain via rear panel pot
• Bass and Treble EQ
• Sweepable notch filter for feedback suppression
• Character control which adds additional punch to the WaveMap
• Latency less than 1ms
• Effects loop (TIP send, RING return)
• 1/4″ pickup input, high impedance (1MΩ)
• 1/4″ line output with output level pot on front panel
• XLR DI output, with rear panel option switch for fixed level or level that follows output level pot
• Analog boost and mute circuits positioned after effects loop, so no headroom loss when boosting
• XLR mic input with 48V phantom supply, used for training
• Headphone output
• Phase (polarity) switch on rear panel
• +/-15V internal supplies for professional headroom and dead quiet operation
• SD card slot for field upgrade of software
• 6.3″ W x 5.9″ D x 2.3″ H

The Shure SM81 is an industry standard Cardioid Condenser Instrument microphone. Specs include:

• 0 Hz to 20 kHz frequency response
• Selectable low-frequency response: flat, 6 or 18 dB/octave rolloff
• Low noise and high output clipping level
• Cardioid polar pattern, uniform with frequency and symmetric about axis, providing maximum rejection and minimum coloration of off-axis sounds
• Phantom powering (DIN 45 596 voltages of 12 to 48 Vdc)

More photos here: https://reverb.com/item/29246767-aud...firmation=true