The Acoustic Guitar Forum

Go Back   The Acoustic Guitar Forum > General Acoustic Guitar and Amplification Discussion > Archtops

Reply
 
Thread Tools
  #1  
Old 11-12-2021, 04:16 PM
RJVB RJVB is online now
Registered User
 
Join Date: Mar 2019
Location: La Ferté Milon, France
Posts: 549
Red face String extensions?

This might sound like heresy, or simply madness...

I *really* prefer the sound and feel of silk & steel strings, esp. the 80/20 wound ones, and lately I've become one of the most recent addicts to the Thomastik Plectrums (after reading the rave reviews elsewhere on this forum).

I was thus looking forward to trying them on that archtop I'm hoping to acquire soon, and then someone pointed out they might be too short. Lo and behold, that someone might be right - I've already noticed this on my resonator.

Of course I couldn't resist dreaming up workarounds. I've used the double fisherman's knot with good results to repair string breaks between nut and tuners. I expect that I could use the single version to tie a piece of B string behind the ball end to add just enough length to the wound strings so that the red tissu-wound part can go where it belongs, beyond the nut.

But maybe a solution already exists commercially, or maybe there are well-tested DIY solutions? I could imagine that one could be made from a folded-out sturdy paperclip?
__________________
Pickle: Gretsch G9240 "Alligator" wood-body resonator converted to non-metal strings (China, 2018?)
Dumbo: Seagull Performer CW mini-jumbo (Canada, 20??)
Bolink baroque violin (Hilversum, 1982)
Reply With Quote
  #2  
Old 11-17-2021, 06:16 PM
Richard Mott Richard Mott is offline
Registered User
 
Join Date: Nov 2010
Posts: 323
Default

In the past I’ve tied broken wound G strings with a sheet bend knot, behind the nut, using a thinner gauge string for the extension. It’s a bit tricky but once the knot is tight, it has worked fine, no noticeable tonal impact that I can recall. So maybe that would work. You might also write the factory for a few custom sets of extended length and see if they will accommodate. Good luck!
Reply With Quote
  #3  
Old 11-19-2021, 01:00 PM
RJVB RJVB is online now
Registered User
 
Join Date: Mar 2019
Location: La Ferté Milon, France
Posts: 549
Default

That one looks a lot simpler than my double fisherman's knot, and easier with thicker (wound) strings. I suppose you did the loop that passes under itself with the thinner string?

For the ball-end side of intact strings, you'd think a solution should be possible hooking into those little balls that looks so suspiciously like brass rings
__________________
Pickle: Gretsch G9240 "Alligator" wood-body resonator converted to non-metal strings (China, 2018?)
Dumbo: Seagull Performer CW mini-jumbo (Canada, 20??)
Bolink baroque violin (Hilversum, 1982)
Reply With Quote
Reply

  The Acoustic Guitar Forum > General Acoustic Guitar and Amplification Discussion > Archtops

Thread Tools





All times are GMT -6. The time now is 08:39 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2021, vBulletin Solutions Inc.
Copyright ©2000 - 2021, The Acoustic Guitar Forum
vB Ad Management by =RedTyger=