#1
|
|||
|
|||
Taylor Heel Strap Button Location
I need to put a strap button on the heel of my R. Taylor and need some measurement assistance. I know you have to be pretty specific about placement because of the neck being bolted on. Can someone give me a measurement for placement? I have read that it's two inches below the fretboard, but I wasn't sure if that was for an older neck or the newer necks. Any help would be greatly appreciated.
Kendall
__________________
Current 2021 Boucher SG21-VK 2017 Caleb Smith Cruiser Mah/Adi 2022 Yamaha FG5 2010 Taylor DN3 |
#2
|
||||
|
||||
I don't know the dimension, but I know you can google images and get a good idea - If I recall correctly it was exactly mid-point of the heel's length. Pictures online will show you very safely how far down to go.
__________________
Fazool "The wand chooses the wizard, Mr. Potter" Taylor GC7, GA3-12, SB2-C, SB2-Cp...... Ibanez AVC-11MHx , AC-240 |
#3
|
|||
|
|||
I tried that and couldn't tell much about the dimensions. I figured someone here would probably know the exact measurements. I even found an old service bulletin from Taylor, but I'm not sure if that is the old neck.
__________________
Current 2021 Boucher SG21-VK 2017 Caleb Smith Cruiser Mah/Adi 2022 Yamaha FG5 2010 Taylor DN3 |
#4
|
||||
|
||||
I'll measure when I get home
__________________
Fazool "The wand chooses the wizard, Mr. Potter" Taylor GC7, GA3-12, SB2-C, SB2-Cp...... Ibanez AVC-11MHx , AC-240 |
#5
|
|||
|
|||
__________________
Current 2021 Boucher SG21-VK 2017 Caleb Smith Cruiser Mah/Adi 2022 Yamaha FG5 2010 Taylor DN3 |
#6
|
|||
|
|||
Taylor used to have a spec sheet for that on their website. I’d start there.
|
#7
|
|||
|
|||
__________________
Early Ovation classical 2001 Taylor 355 2002 Taylor 308 BB 2004 Taylor 214 2011 Taylor GC4 1964 Fender Stratocaster 1965 Fender Jazz Bass Fender Twin Reverb |
#8
|
|||
|
|||
Quote:
kwh
__________________
Current 2021 Boucher SG21-VK 2017 Caleb Smith Cruiser Mah/Adi 2022 Yamaha FG5 2010 Taylor DN3 |