The Acoustic Guitar Forum

Go Back   The Acoustic Guitar Forum > FOR SALE! > AGF Classifieds - Other

Thread Tools
Old 03-08-2018, 03:26 PM
redwood1169 redwood1169 is offline
Charter Member
Join Date: Oct 2012
Location: Ohio
Posts: 180
Default Guitar Building tools and Supplies

After building one acoustic guitar, my guitar building career is over. All of these tools have been used once or not at all. I was gearing up to build a spruce/Cocobolo 855 style guitar as you can tell buy the templates and molds. My job has changed an I have very little free time so I figured I would clean up my shop. I have most of the materials (wood, bindings, rosette, ect) needed to build the guitar if desired. Missing the tuners is about all. I would like to sell it all together if possible. I itemized the tools and parts for a total of $3500 new. I would like to get $2000 plus shipping for the whole deal. Cant say I have much in mind for trade interests but it doesn't hurt to ask. I took quick pictures of everything and I can send them to anyone interested . I have listed the items below with the prices they cost new. Like I said, barely used if at all and taken care of. Thanks, Brandon.

Bending Iron 186
Blues Creek Guitars Side bending jig 340
Guitar Body Cradle for routing 50
LMI Side bending heat blanket 157
LMI Temp control for the blanket 170
Waldron 855 body mold 120
Waldron 855 complete template set 200
String SPace Rule 23
Bridge Pin hole slotting saw 21
Pearl cutting saw and extra blades 30
Radius gauge 15
Fret Rocker 20
3 Degree Bridge pin hole reamer 71
4 double edge nut files (various sizes) 120
Double edge fret file 40
Fretting hammer 30
Fretting plyers 30
4 large Cam clamps 80
Japanese fret saw 45
Scraper burnisher 19
Scraper 8
Dragon hand cut rasps (coarse and fine) 120
Bridge spatula 42
LMI plate joining jig (new) 145
Neck to body joint jig 100
16" fret leveler 56
StewMac precision router base 60
StewMac rosette and soundhole routing jig 90
Various inlay and router bits 50
Inlay tracing scribe 13
Tuner peghole step down bit 50
KMG bridge setter 25
Radius sanding block 16 and 20 degree 30
Fret end dressing file 15
Three corner fret dressing file 25
Saddle slot levelers 1/8" and 3/32 40

Guitar parts

End block and heal block 10
Various bridge blanks 10
Various white MOP dots 20
Ebony bridge pins set 5
Various bone nut and saddle blanks 15
2 MOP blanks 20
various headplates 50
Double action truss rod 25
washburn Rosette 20
Indian Rosewood back and sides 115
Misc fret wire/ purfling/ binding / inlay 50
25.5 slotted ebony fret board 50
walnut neck blank 30
3 Adirondack brace wood blanks 45
Mahogany brace wood blanks 30
Mahogany neck blank 20
Cocobolo back and sides set 200
Sinker Top 75
Adirondack top 30

Last edited by redwood1169; 03-09-2018 at 07:33 PM.
Reply With Quote
Old 03-09-2018, 12:25 AM
Guitars44me's Avatar
Guitars44me Guitars44me is online now
Charter Member
Join Date: Feb 2014
Location: Mountains east of San Diego
Posts: 2,279
Smile Are you sad?

Lots of work is good, but seems a shame to have to let all this go...

Perhaps you should post this in the Custom area as well. That is where a lot of our Luthiers hang.

Best on this


J Kinnaird RP12c Cedar/Hog bevels port K&K
JK RP12c BCEuro/HRW. bevels, port, K&K
RT2 12c Sinker/Claro/Koa bevel ES1.3
JK 00012c Adi/HRW Port K&K
97 Taylor 514c Cedar/Hog
96 412ce Sitka/Hog ES1.2
94 555
Coming: myJK #4!

FS: 94 555
Martin CS 00-12m/adi $2,500
Reply With Quote
Old 03-09-2018, 07:31 PM
redwood1169 redwood1169 is offline
Charter Member
Join Date: Oct 2012
Location: Ohio
Posts: 180

Thanks for the tip. Wasnít sure if it would be moved if I posted a classified elsewhere. Thanks
Reply With Quote

  The Acoustic Guitar Forum > FOR SALE! > AGF Classifieds - Other


Thread Tools

All times are GMT -6. The time now is 08:20 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
Copyright ©2000 - 2018, The Acoustic Guitar Forum
vB Ad Management by =RedTyger=