View Single Post
  #81  
Old 02-09-2017, 03:34 PM
Mark Hatcher's Avatar
Mark Hatcher Mark Hatcher is offline
AGF Sponsor
 
Join Date: Jul 2011
Location: Peterborough, New Hampshire
Posts: 3,903
Default

Quote:
Originally Posted by mcgr40 View Post
I really like this cross grain padauk as the center laminate for the maple neck.
Does the cross-grain padauk go all the way through the neck making right angles with the long grain of the maple? Or is it just 1/4" or so deep so that the
grain in the neck all runs the same way?(I am just wondering if it is okay to build with a cross-ply in the middle of the neck-you must know)
thanks. mike
anyways, i really like it.
Thanks mcgr40,

The cross grain center laminate doesn't go very deep. I would be afraid to go all the way through with the cross grain especially since the torsion rod is in there.
I just wouldn't want to depend on an end grain glue joint there.
__________________
Mark Hatcher
www.hatcherguitars.com

“We learn who we are in practice, not theory”
David Epstein