Quote:
Originally Posted by TEK
Wow, I feel as if I have been scolded for suggesting to use a "digital caliper". I guess I was not clear on how you could do it with a 6 inch caliper.
You don't have to have a long caliper to measure past the 6 inch mark. Just use a good ruler along with your caliper. So if you measurement for a fret is at 225.127mm use a ruler at the nut to mark 200 mm and use the caliper to get your 25.127mm from there. Just make sure you always reference from the nut for every fret position. I just feel better knowing my mark is at 25.127 then when it is a quarter of the way between two marks on a ruler.  Hope that makes sense. |
EDIT:. I just did what I hate, which was to chime in without reading the rest of the comments, which essentially made the point I wanted to make. In the immortal words of Rosanna Rosanna-Dana, “Nevermind...”