One last update before I head down to Pennsylvania tomorrow for the Artisan Guitar Show this weekend! The woodwork is finished on the body for this one and the neck is moving right along. Here are the various pieces of the elevated neck at the beginning of the process...
Once the neck angle is set and the tenon cut, I glue on the extension with a wackload of clamps...
I've been varnishing over the last few days and now that it's flat and level it will hang for a week before french polishing...
For those that might be going, I'll have my most recent f-hole guitar at the Artisan show...
Hopefully meet some of you there!
Mike