Hey that sounds great . And I agree even though I use plugins (mostly EQ) I prefer my my hardware Comp and Reverb.
Understanding that with only solo acoustic guitar it is probably (6's) but have you ever tried setting up your LEX reverb "in parallel" on an Aux track and then sending to it from the guitar track?
Also since I have no experience with UAD or Logic I am curious .
You state you went UA's web sight to get the info to set it up ? Assuming that with UA you deal with a two tiered GUI. system One for UA and one for Logic ?
So does that mean you had to configure the set up in the UA GUI or just in Logic GUI, or both ?
Or put another way why could not you just configure the external hardware routing for the Lex. in the Logic I/O routing matrix? Or does the fact that your interface is UA mean that you have configure it in UA also ?
And does the LEX show as an I/O insert or a plugin insert in Logic ?
The reason is (again only knowing PT) the only config. I had to do for both my HW units in the PT I/O matrix and they show as an I/O selection in the "Inserts section of my PT tracks.
|