Quote:
Originally Posted by Guitaurman
I sometimes run my Yamaha MG 10XU into my Fishman SA 330. It's so simple to do. Just make sure that your mixer's pan controls on each channel are straight up. Then run an XLR (mic cable) from either the left or right output of the mixer, into the Monitor In input in back of the unit. It is the only female input in the back, so it's the only place the cable will fit. You control the output of the Fishman with the Monitor in control on the front of the unit. This bypasses the preamps and mixer on the Fishman,, so you treat it like a powered speaker and use your mixer's preamps, EQ, and effects.
|
You can use an XLR “Y” cable from the mixers L/R output channels so that if any of the pan controls are set incorrectly the signal to the speakers are not affected.
__________________
Taylor V-Class 814ce, 717e BE WHB, 520ce, 454ce, 420 Cedar\Maple, T5z Classic
Martin D18E Retro
Cordoba C10 Crossover
Emerald X20
Rainsong H-OM1000N2
Voyage-Air VAD-04
Custom Les Paul
Hot Rod Deville 410, Fishman Loudbox Performer
|