Quote:
Originally Posted by Borderdon
To achieve maximum performance from any given cartridge/tone arm system, don't forget to make sure to use an alignment protractor to properly locate the
cartridge in the head shell, relative to the record playing surface.
You can download a free protractor from the vinylengine.com
After this easy operation is completed, you can then go ahead and set the arm height, followed by the tracking force as per the manufacturers spec's.
(- if your arm is height adjustable)
Otherwise, it's gonna sound like a cactus needle dragged over a rusty pie plate !
|
This.
You really should go to Vinyl Engine and join. Ask the same questions there. There are no doubt people familiar with that exact turntable, who can give you great advice. I'm not at all familiar with Yamaha turntables, so that's the best advice I have.
http://www.vinylengine.com/