View Single Post
  #16  
Old 01-14-2020, 08:38 PM
hess hess is offline
Registered User
 
Join Date: Jun 2016
Posts: 76
Default

Quote:
Originally Posted by Talldad View Post
However you choose to file your slots you will leave a rough surface in the slot, this will snag your strings, especially the G.

If you can get a hold of a tiny drill set like this then you can smooth off the slots.

This will make tuning your new setup a delight.

https://www.ebay.co.uk/itm/SMALL-TIN...MAAOSw4RZa~u0w
Thank you for this clever tip! I had a couple treble B and E strings pinging but was hesitant to clean them up with the nut files for fear of making them deeper. I already had a few of these mini bits and was able to clean up the problem B and E nut slots without making them any deeper using a #76 for E and #72 for B. Just pulled them thru lightly and then worked in a little tri-flow lub with them. Problem solved!
Reply With Quote