Quote:
Originally Posted by Pluedus
looking to service a mandolin not build
I scooped the end of my fretboard after watching videos on how to do it. The fret slots on my mandolin's fingerboard were cut pretty deep, so I had to go thin with the scoop.
My issue is
1. the binding around the end of the fretboard is loose and I need to know what type of adhesive I could use to secure it.
2. the binding is a 3 ply white/black/white. While scooping, because the fret slots were cut so deep, I've run into the black portion of the binding. Anything I can do without re-binding the fretboard?
Thanks in advance for all the good knowledge on the forum!
|
I don't think you need a mandolin luthier, per se, any good luthier could help with this. Good luck.