Alistair,
I hope the hospital issue is either just a check-up or something minor, and that you are back in action soon!
My question is whether any of your models, most likely the X10 (or possibly the coming X20-OS), could be produced with a short scale (probably 24.875 inches, i.e. 24 7/8 inches), with 14th frets to the neck. If so, would the bridge remain in the standard position and the reduction in length come from the neck, . . . versus the neck remaining the same length and the bridge being moved closer to the sound hole (which would not be desirable, since that would presumably negatively impact the tone)?
Best regards,
Jim K
|