View Single Post
Old 10-17-2020, 09:50 PM
Brucebubs's Avatar
Brucebubs Brucebubs is online now
Charter Member
Join Date: Jan 2013
Location: Eden, Australia
Posts: 15,084

Firstly they are not Gotoh 310's - they are Gotoh 301's.

Looking at the spec drawings of the SG 301's and SGV510's the distance from the center of the string shaft to the center of the locating screw hole are identical (10.5mm) - same washer and nut size too - should be a simple straight swap.

I notice the locating screws are the same length but those supplied with the 510's is just slightly fatter near the top - 2.1mm vs 2.4mm - I'd re-use the ones that came out because you know they already fit.

1972 - Takamine D-70
1980 - Morris B-50
2002 - Guild F-412
2014 - Alvarez ABT60 Baritone
2015 - Kittis RBJ-195 Jumbo
2012 - Dan Dubowski#61
2012 - Epiphone EJ-200/N
2018 - Rickenbacker 4003 Fireglo
2020 - Gibson Custom Historic 1957 SJ-200

Last edited by Brucebubs; 10-17-2020 at 11:50 PM.
Reply With Quote