Quote:
Originally Posted by LouieAtienza
I think my eyes are blinded by gel coat!
Is there any post-process work needed on that gel coat once it's cured?
|
Haha, its pretty bright!
Yes. First 24 hours on room temperature then 15 hours at 60 degrees Celcius. I called the company, he say i should apply all layers and then put the heat on in. I asked if i should heat on every layer, that was not the case so I timed 24 hours starting at the gelling of the last layer (i put 3 layers of this gelcoat on).
The plug has edges on it and a lid with 2 electic ovens will provide the heat for 15 hours.
This is a plug so the negative will be upside down, a mold with a guitar shaped hole in it.