SOLD - PENDING PAYMENT.
I'm selling my 2016 Collings 001mh (with adi braces) in near mint condition. The only pin drop I can find is on the back towards the lower-bout of the guitar.
The previous (local) owner took immaculate care of this guitar and it's been nothing short of pampered since then. They did install a neck strap pin, located on the underside of the heel which does not interfere at all with playing in the upper fret-range.
The 00-12 frets from Collings are very special, and this all-hog is no exception. Selling since I was just surprised with a custom order Collings!
It has always been properly humidified in a non-smoking home and comes with a near-mint case too.
***
Specs:
Top: Honduran mahogany
Back & Sides: Honduran mahogany
Neck: Honduran mahogany
Body Binding: Tortoise with b/w/b/w top purfling
Bridge: Ebony pyramid-style with 2 5/16" spacing
Fingerboard: Ebony with MOP short dots
Bridge Pins/End Pin: Ebony with MOP dot
Scale Length: 24 7/8"
Nut: Bone, 1 13/16"
Saddle: Bone, Drop-in
Neck Profile: Modified V
Peghead Profile: Tapered slotted square with volute
Neck Joint: Mortise & tenon hybrid
Truss Rod: Fully adjustable
Frets: Medium 18% nickel-silver
Peghead Veneer: Ebony with MOP Collings logo
Tuners: Nickel Waverly (16:1 ratio)
Backstrip: 1-style (Walnut)
Rosette: b/w Purfling
Body Length: 19 3/8"
Body Depth: 4"
Lower Bout Width: 14 1/4"
Total Length: 38"
Brace Material: Adirondack
Brace Pattern: Pre-war scalloped X-brace
Fingerboard Radius: 14" - 26" compound
Body Finish: High gloss nitrocellulose lacquer
Pickguard: Tortoise
Case: Deluxe Hardshell case by TKL
