I use the Taylor method, and the Ernie Ball thing. Anyone gets gets the Ernie Ball thing should know I took mine apart (a bit tricky) and sprayed the gears with some WD-40. Batteries last a lot longer now that the grease is thinned out a bit. Alternately open it up just enough to see where the gearing is, re-assemble, then carefully drill a hole in the case, through which you can apply the WD-40.
__________________
Site here by Bob Womack has great info. A 'must read'.
http://www.in2guitar.com/
Taylor 914CE
Stonebridge gs 23 cr
|