View Single Post
  #23  
Old 02-09-2020, 07:49 AM
jonfields45 jonfields45 is offline
Registered User
 
Join Date: Jun 2011
Location: Allentown, PA
Posts: 4,603
Default

Quote:
Originally Posted by Lezz60 View Post
I emailed a couple of WAV Files to Jon today, following the instructions in the 1st post. Recorded using Helix LT into Reaper, using USB 1/2 and 3/4 for Piezo DI and Mic.
I very quickly received the IR files...they sound great ! Very accurate tonally to both my guitars ( a 2016 Faith Venus and a 30 year old Westfield)
I did find that compared to previous IR's I have tried, these IR's do need a big Volume boost ( IR at -4.8db, with about +19 db extra Gain via Helix gain Blocks), but once done, all was good.
Thanks Jon, and all that have contributed to this Thread...great stuff
Thanks for the nice feedback! I'm not sure why you need the volume boost. On my HX Stomp for the two guitars I've tried at home, I needed a 2 dB cut to the 50/50 mix of IR/bypass to be the same volume as 100% bypass.
__________________
jf45ir Free DIY Acoustic Guitar IR Generator
.wav file, 30 seconds, pickup left, mic right, open position strumming best...send to direct email below
I'll send you 100/0, 75/25, 50/50 & 0/100 IR/Bypass IRs
IR Demo, read the description too: https://youtu.be/SELEE4yugjE
My duo's website and my email... [email protected]

Jon Fields
Reply With Quote