Before I put the strings on, I could get the neck to flat. But after the strings went on, it bowed. Then I adjusted the truss rod to flatten it out but it can't go far enough. The nut comes off.
Quote:
Originally Posted by mirwa
Taylor necks even the old non removeable ones are pretty good.
First establish if it's a neck to body geometry issue or relief issue.
If you loosen all the strings off can you adjust the neck via the truss rod so a ruler sits perfectly flat across the top of the frets, if yes can you adjust it a little further so the ruler now rocks on top of the frets?
Steve
|