[mirwa]

Very nice system, I install them regularly.

Obtain some superglue gel, the Microphone with its weight has a tendency to fall of the soundboard bride plate, using the gel superglue gives it better adhesion. Sometimes I will also glue the controller to the underside of the sound hole as well, as it falls of occasionally too.

The rest is pretty straight forward

For the wire clips, wrap them on the cable, pre system install to the guitar, lift part of the corner of the protective coating, and using some masking tape attach to that lifted protective covering, when installing, you just pull the masking tape of which reveals the tacky surface and push it straight onto the surface you are trying to attach too.

Steve