[QUOTE=Irish Pennant;5685499]
Quote:
Originally Posted by PTony
I'm still trying to trace down where the hot is coming from. Here's where I'm at. I plug the guitar directly into the mixer and set the gain to where the meter is hardly registering the signal. I then run the guitar through the Radial Direct into the same channel on the mixer, with no adjustments, the gain is clipping. I unplug the channel and then connect a vocal mic to the channel, the signal has no clipping. For powering the RD I'm using a Voodoo Labs Pedal Power ISO 5, 9v-100mA socket, I've tried two other sources for powering the RD. I think I've done all I can do to eliminate all potential areas for signal contamination. All that's left is the RD is sending a hot signal. I'm open to try something else before sending it back.
|
You really should call Radial and talk to them about this.