Thread: Guitar plans
View Single Post
  #28  
Old 02-17-2017, 01:28 PM
Howard Klepper Howard Klepper is offline
Registered User
 
Join Date: May 2008
Location: Earthly Paradise of Northern California
Posts: 6,627
Default

Keep it simple:

Draw straight lines for the taper using the depth at the tail and at the neck plus about 1/4" for slop. Cut on those lines. Leave a little excess length on either end when you draw the lines, and don't trim that off until the sides are bent.

The rest will be done in your radius dish when the sides and blocks are glued together.
__________________
"Still a man hears what he wants to hear, and disregards the rest."
--Paul Simon
Reply With Quote