Quote:
Originally Posted by rmeyer7
OK, now I need some advice/input. Has anyone experienced extremely low volume output from the Baggs Anthem TruMic system?
I'm talking about so little signal that, when plugging into a PA system, the gain for the channel had to be turned all the way up to maximum to get a usable volume.
The cables, DI box and channel on the mixer are all good (work perfectly with my other guitars, including one with the same Anthem system).
Any troubleshooting ideas are appreciated. Of course sending the unit back if it's defective is my last step but I'll do that if I absolutely have to.
|
That is odd. Was the level ok when you tried it out at home? My only other thought would be to use a powered DI like a Baggs Para DI.