[littlesmith]

Enough layers of varnish (fully cured after 72 hours per layer...











This raised area will actually be a lower spot in the negative mold, you have to reverse everything in your head. The rounded edge of this level will be the exact place of the resin infusion MTI hose. This hose goes around the perimiter of the guitar body and all resin wants to go there, the resin will be introduced in the middle.



The purple is the resin entry channel, the red is the MTI resin infusion hose, the green is a double seal flange for the reusable vacuumbag. The air and epoxy wants to go from the purple to the red, saturating all fabric on the way there.