[LouieAtienza]

Originally Posted by littlesmith

Doesnt quite get hot enough, pictures of modifications will follow... Turns out i cant live with these screws sticking out, haha. I wanna get the half round head screws. You can see i`m not a metal worker, the corners do not line up, the sheet should have been bigger or the box smaller. I did not realise it would not reach the corner when bent, just cosmetic, no big deal.

If anybody is planning on making this, i would recommend doing it like this :

Go to the hardware store and buy a cheap countersink bit. Then you can get the screws to sit almost perfectly flush with the metal surface!