Quote:
|
'You weren't paying attention.'
|
I did catch it in the video, but then again I ended up doing the same for the same reason. I was making a quick guitar to try out an idea and I didn't want to bother making a mold so I built my top on the dish that I use to radius the sides for the top. (Rather than have a hole in it and screw down the top at the sound hole I used a clamp from the rafter pushing the middle down.) I figured that since I was binding the sides I didn't need to fit them exactly to the top, that section was going to be routed off anyway. Hide glue and blocks, an hour or two and you are done. Actually is a relaxing task. Built the last half dozen bodies in this method.