View Single Post
  #8  
Old 11-20-2019, 05:08 AM
resorisen resorisen is offline
Registered User
 
Join Date: Sep 2019
Posts: 1
Default

I would cut the slots with nut files to the correct depth with strings on moving each individualy when cutting/ checking depth. Then removing the saddle from the cone and filing the excess. Then reinstalling. If the saddle is glued to the biscuit an not easily removed precaution to not crush it imbalance the cone may include using support of one hand to hold from underneath the cone and using a handheld detail sander.
Reply With Quote