View Single Post
  #3  
Old 11-04-2019, 05:41 AM
MC5C MC5C is offline
Registered User
 
Join Date: Mar 2016
Location: Tatamagouche Nova Scotia
Posts: 876
Default

If the action is correct and the relief is right, then the neck doesn't need to be shimmed. It sounds like the intonation is slightly off, which is very common - it depends on string gauge and action height so a small adjustment in compensation is needed. If the fretted notes are sharp, the point of contact on the bridge saddle needs to be move slightly further from the nut, so the string is longer. Any competent luthier or technician can do this, and you can as well, if you are good with a file. You might was to get a new saddle and work on it, so that your original one is preserved.
__________________
Brian Evans
1935 Dobro model 25 resonator
1943 Paramount (made by Kay) mandolin
1946 Epiphone Zephyr electric archtop
1957 Hofner Senator archtop
1962 Gibson Melody Maker electric
1963 National Dynamic lap steel
1996 Landola jumbo
1998 Godin Artisan TC electric
1998 Epiphone SG electric
2010 GoldTone PBR-CA resonator
2015 Evans electric archtop
2016 Evans archtop
Reply With Quote