View Single Post
  #8  
Old 12-26-2018, 01:15 PM
Neil K Walk Neil K Walk is offline
Registered User
 
Join Date: Aug 2006
Location: SWPA
Posts: 6,326
Default

I bought a radius jig to sand the radius in the underside of the braces. When it came time to glue down the braces I opted to use clamps and cauls and let the braces dictate the shape of plate.

When it came time to do the rims though, I had to get creative. I ended up tracing the arc from the brace jig on to the side of a 2x4 and cutting it out with a band saw. That would then be my sanding stick. I still havenít figured out how I will go about gluing the plates to the rims, but I once read about a jig that was made with index cards that I may give a try.
__________________
~ Neil (sofa player, shower singer and basement whittler)
Reply With Quote